Battery Installation And Charging; Product Description - Serene CA-PX User Manual

Battery Installation and Charging

1. Turn Power switch to the OFF position. Pull to
remove the battery tab to engage the pre-installed
battery. If the tab breaks, remove the security screw
and open the battery door to remove the tab. Close
the battery door and re-apply the security screw.
Note: Do not use regular alkaline or other non-
rechargeable batteries, as they will damage the
unit and void the warranty. For optimal
performances, batteries should be replaced once
every year.
2. Plug the AC adapter into the electrical outlet and
connect the charging cable to the CA-PX. If this is
the first time using the batteries, let the batteries
charge for about 3-4 hours before use. Fully
charged batteries can last 3-6 days depending on
usage.
Note: CA-PX must be turned ON during charging

Product Description

Icon Buttons Braille Characters
7