System Components
Dome Antenna
The Dome Antenna houses the positioning mechanism, LNB (low noise block), and control
elements within a plastic watertight dome. One coaxial cable to the control box is used for
the power and satellite signal. On the twin model the second coaxial cable carries only
satellite signal.
Control Box
The Control Box is the system's user interface, providing access to the system and its
functions through LEDs and buttons. The Control Box also serves as the vehicle's junction
box, allowing the system to use vehicle power, send and receive data from the antenna unit.
Control Box Connections & Features
Power IN
12-24v input via lead supplied
Power Out
Can be used to power your receiver
Antenna - F Type Input
Attach to the Dome Antenna via the Coaxial Cable
Receiver – F Type Output
Use the fly lead to attach to your satellite receiver
RS-232
Allows software updates via a PC if required
Product Contents
Dome Antenna Unit
Control Box
1.5m Power Cable
1 x 5m Coaxial Cable with Cable Entry cover attached (MXL007 model)
2 x 5m Coaxial Cable with Cable Entry cover attached (MXL007/TWIN model)
1m Coaxial Flylead
Instruction Manual
Installation Pack(cable clips, screws)
7