Table of Contents
Advertisement
5.2.2 Dimensions lock Remote 3010 - long connection with mechanical emergency lock
5.3 Mounting
5.3.1 Drill pattern lock Remote 3000/3010
66,5
17,3
• For fixing the electronic lock 4 threaded holes M6 with depth min. 6 mm (or a comparable inch thread) have to be drilled
into the safe door.
• Fixing the electronic lock/emergency lock with screws M6 or a comparable inch thread. Length and material application of
the screw has to be selected such as a secure long-term stability is guaranteed.
• Turn the screws with a maximum turning force of 3.5 – 5 Nm.
• Independent loosening of the screws has to be avoided. Recommendation: put lock washers underneath the screw's head.
• After the installation the lock's bolt may not be loaded.
• Mind sufficient slackness of the locking point.
66,5
5.3.2 Bolt load lock Remote 3000/3010
F
• The maximum and constant bolt load against closing direction may not exceed the following limits:
Remote 3000/3010
6
Hub/stroke 12
Installation example
17,3
2,5N
Installation instructions FinKey
116
88
9,1
66,5
13,5
58,3
66,5
88
Remote 3010
34
Area around the
3
unlocking lever must
be protected
especially.
Mechanical
25
emergency lock
Rel. 1.3
Advertisement
Table of Contents
