Kia Amanti 2009 Owner's Manual page 217

Ofrecido por www.electromanuales.com
Flashing
Transmitter
2. Press and hold the button on the
HomeLink system you wish to train
and the button on the transmitter while
the transmitter is approximately 3 to 7
cm away from the mirror.
release the buttons until step 3 has
been completed.
3. The HomeLink indicator light will flash,
first slowly and then rapidly. When the
indicator light flashes rapidly, both but-
tons may be released. (The rapid
flashing light indicates successful pro-
gramming of the new frequency sig-
nal.)
✽ ✽ NOTICE
Some gate operators and garage door
openers may require you to replace step
MMSA5006
#3 with the "cycling" procedure noted in
the "Canadian Programming" section
of this document.
Do not
Driving tips
Rolling code programming
To train a garage door opener (or other
rolling code equipped devices) with the
rolling code feature, follow these instruc-
tions after completing the "Programming"
portion of this text. (A second person
may make the following training proce-
dures quicker & easier.)
4. Locate the "learn" or "smart" button on
the device's motor head unit. Exact
location and color of the button may
vary by product brand. If there is diffi-
culty locating the "learn" or "smart" but-
ton, reference the device's owner's
manual or contact HomeLink at 1-800-
355-3515 or on the internet at
www.homelink.com.
5. Press and release the "learn" or
"smart" button on the device's motor
head unit. You have 30 seconds to
complete step number 6.
5 27