1. Manuals
  2. Brands
  3. Cross Technologies Manuals
  4. Cables and connectors
  5. 1584-45
  6. Instruction manual

Cross Technologies 1584-45 Instruction Manual

Rf splitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
MONITOR 1
MONITOR 2
LNB VOLTAGE
LNB VOLTAGE
GND
+DC
ON
RF
GND
+DC
ON
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
MONITOR 3
LNB VOLTAGE
LNB VOLTAGE
RF
GND
+DC
ON
RF
GND
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com
Model 1584-45
MODEL 1584
MONITOR 4
SPLITTER
1
2
+DC
ON
RF
POWER
RF Splitter
April 2013, Rev. C
C
T
ROSS
ECHNOLOGIES INC.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1584-45 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cross Technologies 1584-45

Summary of Contents for Cross Technologies 1584-45

  • Page 1 POWER Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.

  • Page 2: Table Of Contents

    WARRANTY - The following warranty applies to all Cross Technologies, Inc. products. All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies.

  • Page 3: General

    1.1 Equipment Description The Model 1584-45 is four, five way, 0.95 - 2.05 GHz, 0 dB gain splitters in a 1 Rack Unit chassis with redundant 100-240 ±10% VAC power supplies. Each splitter provides fused DC power insertion on the input connector center pin, surge protection, and excellent RF characteristics.

  • Page 4: Technical Characteristics

    1.2 Technical Characteristics TABLE 1.0 1584-45 RF Splitter Equipment Specifications** Input Characteristics Input Impedance 75Ω, (50Ω, Option -D) Return Loss 12 dB min., 14 dB typical Input Level -20 dBm total maximum Output Characteristics Impedance 75Ω, (50Ω, Option -D) Return Loss 12 dB min., 14 dB typical...

  • Page 5: Installation

    2.0 Installation 2.1 Mechanical The 1584-45 consists of one RF printed circuit board (PCB) housed in a 1 RU (1 3/4 inch high) by 12 inch deep chassis. Redundant, switching, +24 VDC power supplies with the DC output diode OR’d provide redundant power for the internal and external amplifiers and LEDs.

  • Page 6: Rear Panel Input/Output Connectors

    Fast Blo, 5mm fuse Fast Blo, 5mm fuse Blo, 5mm fuse Blo, 5mm fuse FIGURE 2.2 1584-45 REAR PANEL 2.3 Front Panel Monitors and Indicators Figure 2.3 shows the front panel monitors and indicators. DS3 - LNB2 VOLTAGE LED DS1 - LNB 4 VOLTAGE LED...

  • Page 7: Operation

    Operation 1.) Connect RF cables to the 1584-45 (See Section 2.2). 2.) IF DC VOLTAGE IS REQUIRED ON THE SPLITTER RF INPUT CENTER CONDUCTOR, install 1/4”, 1 amp fast blo fuses in Fuse 3 and/or Fuse 4 holders. CAUTION! -- IF FUSES ARE INSTALLED IN THE Fuse 1, 2, 3, or 4 HOLDERS, +22 VDC WILL APPEAR ON THE CORRESPONDING SPLITTER INPUT CONNECTOR CENTER PINS.

  • Page 8: Environmental Use Information

    If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 1584-45 Manual, Rev C Page 8 4/24/13...

  • Page 9: Cross Technologies, Inc

    ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com 1584-45 Manual, Rev C Page 9 4/24/13...

Table of Contents