Table of Contents
Advertisement
Quick Links
Instruction Manual
C
T
ROSS
ECHNOLOGIES, INC.
LNB VOLTAGE
RF MONITOR
ON
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,
but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.
for purposes of operating the equipment. Printed in USA.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.
284 SPLITTER
POWER
GND
+DC
ON
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005
FAX (770) 886-7964
Toll Free 888-900-5588
WEB: www.crosstechnologies.com
E-MAIL: info@crosstechnologies.com
Model 284-19
LNB FUSE F1
OUT J1 OUT J2 OUT J3 OUT J4
DC
IN J9
OUT J8 OUT J7 OUT J6 OUT J5
J12
RF Splitter
July 2009 Rev A
C
T
ROSS
ECHNOLOGIES, INC.
Advertisement
Table of Contents
Related Manuals for Cross Technologies 284-19
Summary of Contents for Cross Technologies 284-19
- Page 1 RF MONITOR Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment. Printed in USA. When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number, equipment serial number, and a description of the part.
-
Page 2: Table Of Contents
All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages. -
Page 3: General
1.0 General 1.1 Equipment Description - The Model 284-19 is a nine way, 0.95 - 2.1 GHz, 0 dB gain splitter in a 4.7”W x 1.75”H x 6.5”D bench top chassis (or mounted on an optional 1 Rack Unit panel) with a 115 VAC wall power supply. -
Page 4: Technical Characteristics
1.2 Technical Characteristics TABLE 1.1 284-19 RF SPLITTER SPECIFICATIONS Characteristics Specifications* Input Characteristics Input Impedance/RL Reutrn Loss 12dB, min, 0.95-2.05 GHz; 14dB, typ, 0.95-1.75 GHz Input Level -20 dBm total maximum Output Characteristics Impedance/RL Return Loss 12dB, min, 0.95-2.05 GHz;... -
Page 5: Installation
2.0 Installation 2.1 Mechanical - The 284-19 consists of one RF printed circuit board (PCB) housed in a 4.7”W x 1.75”H x 6.5”D bench top chassis. A 115 VAC, 60Hz wall power supply provides +18VDC power for the internal and external amplifiers and LEDs. -
Page 6: Rear Panel Input/Output Connectors
DS1 - LNB VOLTAGE LED DS2 - POWER LED Green LED lights when LNB Green LED lights when power is voltage is present on splitter applied to unit input, J9. FIGURE 2.3 284-19 FRONT PANEL 284-19 Manual, Rev A Page 6 07/27/09... -
Page 7: Operation
2.5 Rack Mounting - The 284-19 is packaged in an aluminum extrusion. The -R option is mounted on a 1 3/4” x 19” rack panel that can be mounted to a rack using the four holes at the ends. To mount a 284-19 unit to... -
Page 8: Environmental Use Information
G. Top Cover - There are no serviceable parts inside the product so, the Top Cover should not be removed. If the Top Cover is removed the ground strap and associated screw MUST BE REINSTALLED prior to Top Cover screw replacement. FAILURE TO DO this may cause INGRESS and/or EGRESS emission problems. 284-19 Manual, Rev A Page 8 07/27/09... - Page 9 ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB: www.crosstechnologies.com E-MAIL: info@crosstechnologies.com Printed in USA 284-19 Manual, Rev A Page 9 07/27/09...
Need help?
Do you have a question about the 284-19 and is the answer not in the manual?
Questions and answers