Page 1
DVR2 MOBILE DIGITAL VIDEO RECORDER Thank you for purchasing Voyager DVR2 Series Mobile DVR. Before using the Digital Video Recorder, please ensure that you read and understand the User Guide. Please store the User Guide at an easily accessible location.
SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un- insulated “dangerous voltage”...
Disclaimer The information in this manual is believed to be accurate and reliable as of the date of publication. The information contained herein is subject to change without notice. Revisions or New editions to this publication may be issued to incorporate such change ...
Page 5
Continued use of the equipment may result in fire or electrical shock. Please contact ASA Electronics (888)-283-7374. Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire.
Caution Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where there is high temperature or high humidity. Use the device at temperatures within -20°C - +60°C (-4°F - 140°F) and humidity below 90 %.
Package Contents Please check the package and contents for visible damage. If any components are damaged or missing, do not attempt to use the unit, please contact ASA Electronics (888)-283-7374 immediately. If the unit must be returned, it must be shipped in the original packing box.
1. Panel 1.1. Front Panel ① ② ③ Slider-type SD Card Lock Cover and Lock-Switch ① The Cover must be locked after inserted SD card, and so the Lock-Switch can be on. LED Indicators (Power, Recording, Error, Networking Status) ② USB-type 3G or Wi-Fi Modem Connector ③...
Format SD card as FAT32 before inserting the SD card in the PC . *NOTE: 64 GB or larger sizes of SDXC cards should be formatted in PC. Requirements during Voyager DVR2 operation (REC, Network and Etc.) - If the regular recording file does not exist in the SD card, the memory space of SD card should be over 900MB.
3. Live Monitoring ① ④ ③ ② ⑤ When device is connected to a V-out monitor, user get a real-time monitor view as above. ① 2 – Channel real-time video view ② GPS Information : GPS Coordinates, Speed, Connected satelites numbers, Signal strength of GPS ③...
The device can only be controlled via pre-set SD card. User have no control over the above screen. Settings will be controlled and applied through included software. Details are mentioned below in “4.4. Option” 4. DVR2 Viewer 4.1. Installation (1) Select the install program icon and double-click. MOBILE DIGITAL VIDEO RECORDER...
Page 13
(2) If you agree to the License Agreement, select [agree] and click [next]. (3) Select the folder on your computer that you want to install the software and click [Next]. MOBILE DIGITAL VIDEO RECORDER...
Page 14
(4) Select or rename the Start Menu Folder and click [Next]. (5) Click [Next] when installation is completed. The installation may take a few minutes. MOBILE DIGITAL VIDEO RECORDER...
(6) Click [Finish] to complete the installation Process 4.2. PC System Requirements for Mobile Viewer Software. (a) Core 2 Duo 2.4 GHz or higher (b) Over 100MB HDD Memory (c) 1,024 MB System Memory or higher (d) 1,024 x 768 Display Resolution, 32 Bit color Windows XP, VISTA, 7 Spare 10/100-BaseT Ethernet Port (g) Microsoft DirectX 9.0c or higher...
4.3. Viewer Software Main Window ① ② ③ ④ ⑥ ⑤ ① Video View 2 Channel Video view with “Change” button to enhance the size of the main channel the user intends to observe. ② List/Map Select the tab to show the desired information LIST : List of recording files User can browse through the files in order to select recording of certain time...
Page 17
MAP : Real-time location view at the time of recording ③ Playback Control Bar : Skip to Previous / Next Recording File : Play / Pause the recording : Mute / Volume Control ④ File Options : Open a new set of recording files. (The software auto-detects inserted SD card with recording files.) : Export and Save the Video : Captures the video to BMP image files of the enhanced channel...
User can click on each icon to select conditions of recordings shown on the LIST. – Driving (moving)/Impact Event/User Event/Accident The icons are activated when red and deactivated when grey. 4.4. Option User can set up Device or Viewer 4.4.1. DVR 2 Option 4.4.1.1. Camera Option (DVR2) MOBILE DIGITAL VIDEO RECORDER...
Page 19
4.4.1.1.1. Cam 1 / Cam 2 Set-up of Recording Quality of Video Channel 1& 2 Very Low Very Low Quality / Very High Storage Efficiency Low Quality / High Storage Efficiency Average Moderate Quality / Moderate Storage Efficiency High High Quality / Low Storage Efficiency Very High Very High Quality / Very Low Storage Efficiency Recording of each video quality...
Page 20
4.4.1.2. Record option(DVR2) 4.4.1.2.1. Impact record set up User can set up options related with impact recording as an event. Recording Time: Set up the recording pre/post time. (10 ~ 300 Sec.) Sensitivity Setting: Select sensitivity of G-sensor. (0.1 ~ 5.0 G) <Note>...
Page 21
4.4.1.2.3. Crash record set up User can set up option related with crash record. Recording time: Set up the recording pre/post time. (10 ~ 300 Sec.) <Note> Crash record will be activated when device recognizes over 5.0G Etc. 4.4.1.3. 4.4.1.3.1. Region setting a.
Page 22
4.4.1.3.2. Video setting a. Screen Flip: Reverse playback image vertically. b. Screen Mirroring: Reverse playback image horizontally. 4.4.1.3.3. Video Mode a. Select video format (NTSC / PAL) 4.4.1.3.4. Information Viewer version information 4.4.1.3.5. Device log MOBILE DIGITAL VIDEO RECORDER...
5. How to 5.1. Open the Video File 1. Press button on the Voyager Viewer Software. 2. Select the folder to open the recorded files After press “OK” button, recorded file will show on the “LIST” tab. Double click the file to play on the Viewer.
5.2. Export and Save the Video File 1. Press button on the Voyager Viewer Software. 2. Press button to select the recorded file to export and save. 3. Press button to choose the file. 4. Select the desired channel icon between “Ch.1” and “Ch.2” to export and save.
Page 25
5. Choose the folder where the exported file will saved. And then press “Save” button to save the recorded file. <Note> Recorded file will save as .avi file type only. 6. After exporting is complete, the “Export Video” window will disappear. MOBILE DIGITAL VIDEO RECORDER...
5.3. Save the Capture Image 1. Press on the Voyager Viewer Software. <Note> Capture function will only work during the video play back. 2. Choose the desired channel of captured image from the drop down selection on the window. And then press button to open the “Save As”...
5.4. Print out the Capture Image 1. Press on the Voyager Viewer Software. 2. Choose the desired channel of captured image from the drop down selection on the window. And then press button to open the “Print” window. 3. Choose the printer from the drop down button on the window. After printer selection, press “OK”...
6. Specifications Video Input 2 CH BNC Video Live Output 1 Port (CVBS-RCA) Compression H.264 Real Time Recording (Overwriting) Rec. Mode Event Recording (Protected) Operating System Embedded Linux LED Indicators Power, Recording, Error, Net Sound Buzzer Recording Speed 720 X 480 / 30fps Audio Input 1CH RCA Alarm Input...
Page 29
WEEE Symbol Information Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates, that it should not be disposed with other household wastes at the end of its working life.