1. Manuals
  2. Brands
  3. Voyager Manuals
  4. DVR
  5. DVR4100
  6. User manual

Voyager DVR4100 User Manual

Mobile digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Voyager
DVR4100 MOBILE DIGITAL VIDEO RECORDER

User Manual

Thank you for purchasing our product.
Please read instructions before operation.
Change without Notice.

Advertisement

Table of Contents
loading

Related Manuals for Voyager DVR4100

Summary of Contents for Voyager DVR4100

  • Page 1: User Manual

    Voyager DVR4100 MOBILE DIGITAL VIDEO RECORDER User Manual Thank you for purchasing our product. Please read instructions before operation. Change without Notice.
  • Page 2 Safety Precautions CAUTION RISK OF ELECTRIC SHOCK CAUTION : To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Only operate this apparatus from the type of power source indicated on the label. The company shall not be liable for any damages arising out of any improper use, Even if we have been advised of the possibility of such damages.

  • Page 3: Fcc Statement

    FCC STATEMENT WARNING This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation." WARNING This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

  • Page 4: Table Of Contents

    Table of contents ……………………….. 1. Package contents ……………………….. 2. Product overview ……………………….. 3. Physical connection ……………………….. 4. Setup ……………………….. 5. DVR operation via video out ……………………….. 6. DVR operation via browser ……………………….. 7. Configuration ……………………….. 8. Register Server Installation instructions ………………………..

  • Page 5: Package Contents

    1. Package Contents Description Picture Power cable (6 pin/6m) + 5A fuse X 2 I/O cable G-Mouse (Male/5m) Wifi antenna (Female) Remote Controller + battery Screw x 6 SSD rack locker key...
  • Page 6 Cable with 4 video input and one usb port (1 pieces) External Indicator (optional) CD Contents Description Voyager Player Voyager VMS RegisterServer_Setup ServerDBInstall...

  • Page 7: Product Overview

    (※ Front panel USB port recommended only for USB storage, mouse recommended use the back Cable wire’s USB port ) ※ Notice : The warning sticks in front panel. The content is show as below: Back Panel DVR4100: with 3G (4G) / WIFI function...
  • Page 8 Cable pin definition I/O cable pin definition Female connector ① ④ ② ③ Pin number Description +12V Audio Video...
  • Page 9 The function button of this IR remote controller as below Lock the DVR system need a password to Lock unlock it Panic Panic record button Go to ‘MENU’ mode to setup the system Menu Search Search recorded video Backup Backup the recorded data to other device Direction Move the cursor ◀,▶...

  • Page 10: Physical Connection

    3. Physical Connection SSD installation ① Please insert the key in the front of the device and turn counterclockwise 90° to unlock. ② Loosen the two screws and take off the cover. ③ Pull the rack out to install SSD.
  • Page 11 ④ Turn the rack over to install SSD. Please take note of the direction and tighten SSD up by the four screws. ⑤ Set the SSD back to DVR. Please be sure you it is locked. After you installed the SSD, please put the rack back into the mobile DVR, tighten the two front screws and lock the rack.

  • Page 12: Sd Card Installation

    SD card installation 1. Shut the power down 2. Loosen screws and open the cover 3. Insert SD card in the slot properly ※When SD card is installed, the bottom screen will display an Icon as Please refer to below photo. Icon and storage information will be shown here.

  • Page 13: Sim Card Installation

    SIM card installation When you purchase your SIM card to your telecom provider, please make sure that it meets one of the following standards in order to work: GSM 850 900 1800 1900 WCDMA 850 1900 2100 ① Loosen 4 bolts of the top cover and open it. ②...
  • Page 14 ③ Insert the SIM card with its gold contact facing down and as below shown. ④ Put the lid back and push it to lock. Indicator light Always ON Always OFF Flashing LED Color Description Warning: recording device can’t record、Vloss Record No recording (Normal/Event)
  • Page 15 Power Setup Cable type Meaning Ground - Power + ACC power ※ POWER: DC 9.6-32 V Connect to ACC of your car CAR BATTERY For your information ground and power + cable are protected with a 5A fuse. Note that, do not pull the power connector when the DVR is recording to avoid the SSD be damaged.

  • Page 16: Setup

    Icon Description Color Always ON Always OFF Flashing Warning: recording device can’t record、Vloss or Record No recording (Normal/Event) SSD Initial fail System ready Power off Power Green System booting 4. Setup In order to access to the 4CH mobile DVR with a notebook, you need to have RJ45 cross cable Link the notebook to the DVR with the LAN cable Under windows 7...
  • Page 17 Then click on Internet Protocol IPV4 and click properties Assign an IP address to your notebook as the DVR default IP is 192.168.1.99...
  • Page 18 Valid by pressing ok Internet Explorer setting Our device supports Internet Explorer 7, 8, 9(32bits) and 10,11(32,64bits) The default IP address of the mobile DVR is 192.168.1.99 In order to install the active X you need to change your Internet Explorer settings Open Internet Explorer, Click the Tools button, and then click Internet Options.
  • Page 19 The DVR IP should be shown in the Add this website to the zone field. Please make sure that the below option ‘require server verification’ is disabled Click Add and close. Then turn the Security level to Low and press apply Return to Internet Explorer main page Press Install The icon must be in blue color then please login in the DVR...
  • Page 20 A pop up message will display, press Yes to continue...

  • Page 21: Dvr Operation Via Video Out

    5. DVR operation via video out Mouse right click  Advance Advanced Setup...

  • Page 22: Record Setup

    Record Setup:  Record setup  Channel: 4 channels total. From 1~4. Start Record: “ON”, “OFF”   Frame Rate: 1fps~30 fps (NTSC)/ 1fps~25 fps (PAL)  Quality: 5 options can be selected; “highest”, “high”, “normal”, “low”, “lowest”.  Resolution: “320X240”, “720X240”, “720X480”. (NTSC) “320X288”, “720X288”, “720X576”.
  • Page 23  Voltage type:12v or 24v. ※ Battery voltage detection function: when the voltage is too low, will alert user.  Buzzer:  Sensor: “OFF(No suggest)”, “Critical”, “Warning”. Default is OFF  Video Loss: “OFF(No suggest)”, “Critical”, “Warning”. Default is Critical ...
  • Page 24  Event popup: 1 ~ 4 Speed Event Enable: ON/OFF Unit: you can choose between Km/h or MPH Type: High speed / Low speed Enable: ON/OFF Threshold: 1 ~ 300 Delay Time: define the length of the buzzer after each motion detection OFF ~ 9 seconds Email: can send an email to predefined address in case of the event Alarm out: in case of detection, DVR will send a signal via alarm out like a buzzer Event Record: 1 ~ 4.

  • Page 25: Network Setup

    Network Setup Host Setting: user can choose between STATIC IP, DHCP and OFF status For static IP you need to key manually the IP, GATEWAY and NETMASK. For DHCP, the DVR will retrieve the information from the network Net Service Center IP: VMS server IP address.
  • Page 26 E-Mail SMTP Server: E-mail service mail server. Port: E-mail service port. SSL: ON/OFF Sender: sender mail Recipient: recipient mail Enable SMTP Auth: ON/OFF (some mail server need user authentication.) Account: mail service account. Password: mail service password. E-mail test: Due to the authorization problem, some mail server will not work properly. Please click the “E-mail test "...
  • Page 27 3G Network/4G Network Enable: ON/OFF Access Point Name (APN): default is Internet. Access Number: default is *99# Username Password ※ If use 3G (or 4G) to connect network, the bottom screen will display this ICON WIFI Enable: ON/OFF SSID: input your WIFI AP name. Authentication: input your WIFI AP connect key.

  • Page 28: System Tools

    Account authentication User Auth: ON/OFF account Group: Administrator/Guest Password User can setup administrator and guest password System tools Time Setup Date: Year- Month-Day Time: Hour-Minute-Second Display format available: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD Time format: 12 hour or 24 hour Daylight Saving: ON or OFF, after user selects the time zone, if daylight saving is enable, the DVR will automatically adjust the time GPS Time Calibration : Time Zone:...
  • Page 29 Display Select language CVBS X Adj: 0~9 CVBS Y Adj: 0~9 CVBS Height adjustment: 0 ~ 9 CVBS Width adjustment: 0 ~ 9 Video format: PAL ~ NTSC You can enable or disable the following function by click or unclick them ...
  • Page 30 Upgrade After you received the new firmware which name is image.bin, just copy it to a USB solid disk formatted in FAT32, insert in the USB port and click upgrade, you will notice following message Message Description waiting Starts the upgrade process Are you sure to upgrade? The USB key is being initialized, the yes/no will appear after few second...
  • Page 31 Export User can export or backup setting Message Description waiting Starts the process Are you sure to export config ? The USB key is being initialized, the yes/ no will appear after few second Export finish! Press ok to leave the export mode Notice: The export file name is Config, you can rename it for archive purpose but you must rename it as Config if you want to use it to restore setting in your combo DVR Default...

  • Page 32: System Info

    System Info System info: Firmware Version, MCU version, U-boot version, UID SN Network Info: DVR’s IP address, MAC address, netmask, gateway Storage info: Status mention if the SSD is correctly working, its model name and storage utilization GPS info: Time, Longitude, Latitude, Speed, Height, Direction, Viewable, In use, Fixed status. ※...
  • Page 33 Log List Select the channel Define start and end time. DVR4100 available: system, motion, sensor, video loss, network remote access And click on Search it will display the results, and then select the event to play it back Backup Mouse right click ...

  • Page 34: Split Screen

    Sound You can adjust the sound volume with from 1 to 15 Select the channel you want to listen by selecting the channel or press mute to disable sound Split screen User can choose 1、2、3 or 4ch to display Playback Mouse right click ...

  • Page 35: Dvr Operation Via Browser

    6. DVR operation via browser Live preview After you log in, you will access to live picture , there are 5 areas: 1 is all the function of the DVR function are same as main video out 2 is the main display of the camera, to see a camera in full screen, just double click on it. To return to quad mode, please go to VIDEO/LIVE 3 is the log out function and language setting, you can choose English, Chinese, Francais and Portugal.
  • Page 36 OSD operation Video Live Please check page 11 for more information Playback After you make sure that you have enabled video recording, you can playback a video. Select the date on the calendar Then select the time you want to watch Check on below line if it is the period you need If data are available a will appear, then press PLAYBACK,...
  • Page 37 The backup process in % will appear in each channel When backup is finished, a confirmation message will display. Then press Live display to return to normal operation Record User can choose to record one specific channel or all channel. User can enable or disable record.
  • Page 38 use) General configuration Post record 0~30 sec Enable or disable overwriting on SSD Ignition off: After you switch off the power, the user can setup ignition off time Streaming setup...

  • Page 39: Camera Setting

    Camera setting User can change camera title User can adjust camera brightness, contrast, saturation and Hue. Press apply to validate your choice...
  • Page 40 Event VLOSS Select the channel you want to display video loss message. Dwell time: 0 to 9 seconds Email: disable or enable Alarm out: if user wants send alarm out when video loss, click on the 1 so it has a click Motion detection...
  • Page 41 User can setup motion detection one by one or all at the same time To select a cell: Mouse Left Click, / To deselect a cell: Mouse Right Click, To select or deselect a block: Press Ctrl + Mouse Click Blue area means selected /No color area means not selected User can setup which camera to record in case of motion detection Dwell time: 0 to 9 seconds...
  • Page 42 G sensor Enable: ON/OFF Threshold: OFF ~ 5g Dwell time: define the length of the buzzer after each motion detection 0 ~ 9 seconds Email: can send an email to predefined address in case of the event Alarm out: in case of G-Sensor detects a variation, DVR will send a signal via alarm out like a buzzer or flashing red light Speed event This page let user to enable or disable the speed event detection...
  • Page 43 High Speed Same setting applies for Low Speed detection Network This side enables user to setup network in order to remotely connect to it for example with a notebook for maintenance. If the network has a DHCP server, you can enable this function. Please make sure that gateway and subnet mask are the same on both side.

  • Page 44: Server Software Installation

    Register timing Streaming If your network has a router, please make sure to open these ports in order to enable smooth access to the DVR via browser or VMS software. All these port can be customized according to your needs Server software installation Server main purpose is to receive data from each mobile DVR, so user needs to tell to DVR the server IP, open internet explorer and key in the DVR IP, then go to Network then Port...
  • Page 45 Email SMTP server: we recommend to use gmail Port: check with port your SMTP server is using SSL: enable or disable according to your SMTP server Sender: key in the email of the sender Recipient: key in the email of the person who will receive notification in case of event. SMTP authentication: enable or disable according to your smtp server if it’s enable user need to provide the mail account and password...
  • Page 46 Mobile network setting Here you can enable or disable 3G. Provide information of how to connect to the 3G network (please check your operator for dial up procedure) WIFI setting Here you can enable or disable the wifi...

  • Page 47: Configuration

    7. Configuration Information This section shows three type of information: Network such IP, http port, streaming port, MAC address and gateway Wireless network such as connection type, IP and gateway SSD such brand size and occupation ration System Network: displays current network setting and Mac address SSD: displays SSD brand, model number, size and occupation percentage Display User can select which items to display...
  • Page 48 Account Two level of user can be define and unlimited account can be created Guest can only see live picture Administrator as full authority on the device Cell phone and Email are just for reference and optional Date and time Select your prefered date format and hour format here Enable or disable daylight saving, according to the time zone, it will automatically turns it on and off at the right time...
  • Page 49 Modify Serial number, Company name, Driver name and License number Format User must format the SSD before start recording Factory reset Once press this option a warning message will appear asking you if you want to reset, press YES to apply Press ok...
  • Page 50 For troubleshooting purpose, you can browse the log Select the starting and ending time, the channel concerned and use our 4 filters to reduce the number of event then press SEARCH. If you don’t select channel, it will display system event. If you want to backup the log, press BACKUP,...
  • Page 51 Then press download it will export all the events in one csv file Choose Save Then open the file with Microsoft Excel or any program supporting csv file...

  • Page 52: Register Server Installation Instructions

    8. Register Server installation instructions This guide is aim to install database and server application for mobile DVR。 Achitecture mobile dvr server and system architecture is based on three server Register Server, Log Server and Database server Private Network (D) 3G ISP Or Private Network (B) DB Server (G) Log Server...
  • Page 53 8.1 Basic requirements Although the server can be built on the same computer, to have the best performance, we recommend that each individual can have a separate server software hardware environment. Database server and application server farm proposal meet the following basic requirements to achieve the best performance.
  • Page 54 8.4 Go to Microsoft website and download SQL Server 2008 R2 SP2 Express or click the following link http://www.microsoft.com/en-us/download/details.aspx?id=30438 Click on download and select the file SQLEXPRWT_x86_ENU.exe then click on NEXT...
  • Page 55 8.5 Database server installation with SQL Server 2008 Express 8.5.1.1 Launch the application called SQLEXPRWT_x86_ENU 8.5.1.2 Accept the licence term and click on next...
  • Page 56 8.5.1.3 Select all then click on Next 8.5.1.4 Setup database server name and path route...
  • Page 57 8.5.1.5 Set the database server account and specify the account name NT_AUTHORITY\SYSTEM...
  • Page 58 8.5.1.6 Choose Mixed mode and key a passwordfor database server purpose 8.5.1.7 Click on next the installation is finished...
  • Page 59 8.6 Setting database server in order let the client connect to it In windows bar, click on start all program Microsoft SQL Server 2008 R2 Configuration tools  SQL Server configuration manager in TCP/IP option，mouse right click TCP/IP choose Enable Then right-click on "Properties"...
  • Page 61 Install Server database This software is located on the software cd folder called Environment Launch ServerDBInstall.exe, this installer must enter Database administrator (sa) password and automatically creates the necessary databases and tables, and generate the database dedicated management accounts ddadmin, the default password is 1111, for the first time after installation, please Be sure to modify the password.
  • Page 62 confirm whether you want to continue the installation  Installation is finished...

  • Page 63: Vehicle Management Software (Vms)

    A pc viewer called Voyager PLAYER, A server software please follow below instructions Install Register server software located in the cd Setup folder on the server pc and follow instructions Then install the Voyager VMS software on the client pc and follow instructions...
  • Page 64 Operation Server side: launch the application named register-server Default account and password are admin / 1111 Then you will access to a page showing device connection status At this page you can see each device registered ID(RID),Vehicle ID, Version of the firmware, Update time, network information and Status Clear button enables clear the current list, the server will then updates automatically the mobile DVR that can be linked...
  • Page 65 Click on the second tab will let you access to server list Click on the third tab will let you access to the account management...
  • Page 66 There are 3 level of account, Administrator, Operator and Guest each can be customized on the right side. This concerns login from cms client, Click on the fourth tab will let you access to the server setting Server setting: default port is 8788 , you need to double check on the mobile dvr that the port is the same otherwise the server wont be able to see the device Start / Stop the service: the default setting is set on enabled but you can manually stop the server...
  • Page 67 Client side: launch the application called Voyager VMS Fill in Login ID and password Specify the server IP, Specify the server streaming port...

  • Page 68: Tool Bar Description

    Tool bar description Full Screen Displays the video in full screen on your monitor, to return to normal mode press ESC button on your keyboard Video download Manager Download recorded data from the dvr remotely, you can choose the vehicle ID, the channel , the date and time and the backup length and do multiple backup We recommend to be in LAN or WIFI environment to download the data and avoid be in 3G mode to download as the risk of failure is very high...
  • Page 69 Remote setting let you remotely setup mobile dvr features all the functions are the same of the mobile dvr itself , to be able to access to the setting, the dvr must be connected. VMS option Lets you setup the snapshot path folder, live record path folder, event log number, GPS displayed unit, and used map...
  • Page 70 Vehicle list Display or hide the vehicle list 4 type of display are available select the one according to your preference Vehicle list: the program will show connected device with additional information, you can create or delete group for better management and pull one device to a group...
  • Page 71 Before you can see live video, you need to create a group. Click on , a vehicle icon will appear, right click on the mouse to display the functions Add vehicle: choose the vehicle you want to add by selecting them Then confirm by pressing OK...
  • Page 72 Here you can see Live picture and GPS information ※ The GPS function is only for satellite positioning. This figure shows G-Sensor information This section shows real time information such as event, vloss, relay out or motion detection...
  • Page 73 Voyager player application operation: Default id/password is admin/1111 Program interface...
  • Page 74 Item Description ① Position of the vehicle according to OpenStreetMap ② G-Sensor information and current speed ③ Display video by date ④ Playback bar ⑤ Video display mode ⑥ Display video by date ⑦ Sensor trigger status There are two ways to open the files: Open AVI To open a file press the first icon and find the folder you store the avi file You will be able see the recorded files displayed by date...
  • Page 75 Open SSD After you select the SSD you will see this display You can export the video into avi file by pressing the third icon...
  • Page 76 Control bar description Icon Description Open SSD containing the video Open a avi file in a folder Open SD card containing the video Convert a period from the SSD into AVI format Stop the playback Playback Pause Fast Rewind Fast Forward Step Backward Step Forward Playback previous file...
  • Page 77 Snapshot If you press the snapshot icon , a window will pop out You can save manually or auto save the picture You can adjust print setting by pressing SETUP button, another window will come out You can add in your picture print license number, plate number, date and time, and also description (by adding text) If you press PRINT button, the computer will send the picture to your connected printer.
  • Page 78 Setting Here user can select GPS display unit and Map. If you select “disable load map failed message, Voyager player do not show this warning. In this section, you can manage your different account, by changing administrator password or add new account. You can also delete user.
  • Page 79 In this part, you can change channel sequence by clicking UP and Down.

Table of Contents