Mounting The Appliance - Vaillant VER 75/4 Operating Manual

4 Assembly and installation
4.4

Mounting the appliance

a
Danger!
Danger of fire!
Danger of damaging the unit by improper
mounting!
The unit may only be mounted on a fixed,
closed, vertical wall surface.
> Ensure that all fixing parts are strong
enough!
> Also consider the characteristics of the
wall!
Fig. 4.3 Appliance holder as an installation template
(VER 200/4-240/4)
Fig. 4.4 Dimensions (left: VER 75/4-150/4,
right: VER 200/4-240/4)
6
Unit type Measurement A
[mm]
VER 75/4 340
VER 100/4 420
VER 150/4 580
VER 200/4 740
VER 240/4 900
Table 4.1 Unit dimensions
> Remove the appliance holder from the back panel by
pressing in both clips, e.g. with a screwdriver.
The appliance holder serves as an installation template.
> Hold the appliance holder against the wall with the
lower fixing claws on the floor.
> Mark the lower screws holes through the two borings.
> Slide the appliance holder upwards until the markings
can be seen through the lower screw holes.
> Mark the upper screws holes through the two borings.
> Drill the four holes in the wall.
> Fix the appliance holder to the wall with four plugs
and screws (max. ∅ 5.5 mm).
1.
Fig. 4.5 Mounting the appliance
> Position the unit on the appliance holder at the bot-
tom and clip it in at the top.
Installation manual VER 0020064153_01
Measurement B
[mm]
80
128
242
320
405
2.