Advertisement
Exporting a Color Connector File to be a Printer Default
After you create your connector file, do the following steps to send it to
the printer as a default:
1.
Make sure that you save the file.
2.
From the File menu, select "Export As Printer's Default".
The "Select Printer Model" dialog box appears.
3.
Select the printer model from the drop-down list.
4.
Click on OK .
NOTE:
If this is the first time you have created a connector file, a dialog
box appears asking you to locate the media file. Click on OK .
Select "8670 Media V150" in the dialog box that appears. Click on
Open .
CONTENTS
INDEX
SEARCH
Operator's Guide
Printing
Guide
Color Management
Calibration
Network
Interface Guide
Color Management
Options
Using Color
Connector
Using PANTONE®
Color
HELP
Advertisement
