Installing And Removing The Card - Canon EOS 600D Instruction Manual

Installing and Removing the Card

The card (sold separately) can be an SD, SDHC, or SDXC memory
card. The captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to
enable writing/erasing.
Installing the Card
Write-protect switch
Possible shots
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [1 Release shutter without card] to [Disable] will prevent you
from forgetting to insert a card (p.166).
1
Open the cover.
Slide the cover as shown by the
arrows to open it.
2
Insert the card. Insert the card. Insert the card.
As shown by the As shown by the As shown by the illustration, face
the card's label side toward you the card's label side toward you the card's label side toward you
and insert it until it clicks in place. and insert it until it clicks in place. and insert it until it clicks in place.
3 3 3 Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<1>, the number of possible shots
(p.33) will be displayed on the LCD
monitor.
29