Table of Contents
Advertisement
16
Epoxy the PVC parts to the wing tip as below.
17
Assemble the gear doors and the wheels to the retracts.
Retracts strut
Note:rubber wheels oleo struts
and retracts are optional.
18
Assemble the retract
1.5mm
TP Screw(3x20mm)
4
19
Drill holes for pulling out the servo extension line.
Center
line
20
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
6mm
Rib template (2mm ply)
Wood dowel (6x30mm)
2
Rib template (2mm ply)
1
21
According to the rib template drill holes to another
main wing.
6mm
Rib template (2mm ply)
4
66
Epoxy the PVC decoration to appropriate position asbelovo.
67
Trim the cowling along the shaded line.
68
Epoxy the exhaust to the cowling from lnner.
69
Epoxy the plies under the cowing in fuselage and assemble
the cowing to fuselage with TP screw.
TP Screw (2.3x6mm)
1.5mm
TP Screw (2.3x6mm)
Ply (15x15x3mm)
70
Trim the canopy along the shaded line.
71
Epoxy plies under the canopy and assemble the
canopy to fuselage with screw.
TP Screw (2.3x6mm)
TP Screw (2.3x6mm)
10
Ply (15x15x3mm)
10
13
5
5
1.5mm
Advertisement
Table of Contents
