Table of Contents
Advertisement
6
(with 9 servos),
6
6 channel radio for aiplane is highly recommended for this model.
6
: 120 - 4cycle
"
4
Spinner nut
"
15
x7
Apply epoxy glue.
Warning
Remove the covering with proper
pressure to cut through only the covering itself.Otherwise,
cutting down into the balsa structure may weaken the
model part and cause accident.
The pre-covered film on ARF kits may wrinkle due to
variations of temperature.Smooth out as explained right.
Pre-cover the covering with clean cloth!
Start at low setting. Increase the setting if
necessary.If it is too high,you may damage
the film.
Iow setting
with cover(cloth)
Advertisement
Table of Contents
