Sony NEX-FS100C Service Manual page 9

Ver. 1.1 2012.05
The changed portions from
Ver. 1.0 are shown in blue.
2-1-6. MOUNT BLOCK SECTION
Cabinet (F) Section
(See page 2-10)
252
(Note 1, 2)
257
(Note 3)
#191
Ref. No. Part No. Description
251 A-1826-171-A SERVICE, MOUNT BLOCK ASSY
(including ASM080 (CMOS imager) and IS-089 complete
* 252 Selection Parts IM WASHER (A), ADJUST (Note 1, 2)
253 4-269-055-01 MB SHEET, MASK (945)
254 4-269-089-01 CABINET, MASK
255 4-269-067-01 SHEET, MT RADIATION
NEX-FS100C/FS100CK/FS100E/FS100EK/FS100J/FS100JK/FS100N/FS100NK/FS100P/FS100PK/FS100U/FS100UK
251
(including ASM080
252
IS-089 complete
(Note 1, 2)
252
(Note 1, 2)
253
Imager Unit Section
254
(See page 2-9)
257
#191
(Note 3)
#191
255
257
(Note 3)
258
259
#191
257
(Note 3)
261
260
262
Ref. No. Part No. Description
256 4-269-068-01 HEAT SINK, MT
board) (Note 4) 257 4-135-726-01 SHEET (CM), RADIATION (Note 3)
258 1-883-340-11 FP-1400 FLEXIBLE BOARD
259 1-883-341-11 FP-1401 FLEXIBLE BOARD
260 4-269-069-01 FRAME, MT
261 4-269-066-01 HEAT SINK, F
262 A-1826-045-A MT-072 BOARD, COMPLETE
263 1-839-087-11 CABLE, FLEXIBLE FLAT (FFC-257)
#191 4-188-735-01 SCREW (M1.7)
Screw
#191: M1.7 X 3.5 (Tapping)
(Black)
4-188-735-01
1.7
(CMOS imager) and
3.5
board) (Note 4)
Note
Note 1: The IM adjust washers (A) differ in thickness.
Make sure to return the removed IM adjust washers to
original places.
When replacing IM adjust washers, refer to "SELEC-
TION PARTS".
If the original state cannot be restored due to loss of
the IM adjust washer, for example, replace the Mount
Block Assy (Service).
256
Note 1: IM
IM
IM
PARTS"
IM adjust washer
SELECTION PARTS
#191
Ref. No.252
Select the optimum thickness of washer.
4-185-995-01 IM WASHER (A), ADJUST (t = 0.05)
4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
#191
263
2-8
Note 2: Refer to "Assembly-4: Putting position of the IM Adjust
Washer (A).".
Note 2: "Assembly-4: Putting position of the IM Adjust Washer
(A)."
Note 3: The CM Radiation Sheet when peeling off once, so that
it cannot be reused.
(A)
Note 3: CM Radiation Sheet
"SELECTION
Note 4: Precautions for Replacement of the Mount Block Assy
Mount Block Assy (Service)
Service
As Mount Block Assy Service may be damaged by static
electricity from its structure, handle it carefully like for
the MOS IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
Note 4: Assy
Assy
MOS IC