Safety And Compliance - 3D Systems Sense User Manual

SAFETY AND COMPLIANCE

CAUTION: Indicates something may happen that could cause loss of data, damage to
equipment, or could cause personal injury.
SAFETY GUIDELINES
Follow all safety rules in this section and observe all cautions and warnings in this guide.
l
To avoid damage to the laser projector, do not open the Sense 3D scanner casing. Doing so will void your warranty.
l
It is important that the scanner operates in the temperature range of between 10°C and 40°C for optimal use. Higher or
l
lower temperatures may alter the scanner's performance, resulting in the scanner malfunctioning.
The sensor is a class 1 laser product, certified by an external party to adhere to IEC 60825 safety requirements. The
l
Sensor is compliant with part 1 of the IEC 60825 publications - "Safety of laser products."
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
5 3D Systems, Inc.