Photo settings
From the Capture photo screen, tap Settings. The Photo Capture settings screen opens, where you
can manually adjust these settings:
Resolution
Choose from:
•
Large
•
Medium
•
Small
Note: The currently-set resolution doesn't display on the capture screen, so if you
temporarily change the resolution for a capture session, be sure to change it back.
Mode
Choose from:
•
Auto
•
Night
•
Burst
When you start capture in this mode, the camera will take three successive photos
without flash and preview the last image captured when finished.
Flash
Choose from:
•
Auto
Off
•
•
Always on
Lighting
Choose from:
•
Auto
Home
•
Office
•
Sunny
•
Cloudy
•
ONEm User Guide - R1.0.2 - October 20, 2010
- Full-size resolution, largest file size and best quality.
- A compromise between the best and lowest quality. Good for sending.
- The smallest file size, but lowest quality. Best for sending.
- Automatically adjusts exposure based on scene.
- Adjusts the exposure for night lighting.
- Raises the shutter speed, turns off the flash, and enables burst capture.
- Flashes when the camera senses the need.
- Never flashes.
- Always flashes, except in Burst mode.
- Automatically senses the ambient light and adjusts.
- Adjusts to an incandescent light environment.
- Adjusts to a fluorescent light environment.
- Adjusts to a bright light environment.
- Adjusts to muted light environment.
66