Nokia X3-02 Service Manual page 22

13) Lower down the bottom part of the TOUCH
MODULE. Press gently from all sides of the TOUCH
MODULE to active the adhesive.
15) Remove the three adhesive protective films with
the tweezers.
17) Place the side keys to its place and press it gently
to activate the adhesive.
22
14) Place the KEYMAT to its place and press it to lock
the four shown clips.
16) Place the ENGINE BOARD carefully to its place and
press it gently to activate the adhesive.
18) Connect the TOUCH MODULE CONNECTOR with the
SS-93. Be careful not to damage the connector.
Confidential | Copyright © 2011 Nokia | All rights reserved
Nokia X3-02
RM-639
Service Manual Level 1&2
Version 3.0