Led Light Status; Check The Battery Charge Status - Patriot Gauntlet Node Product Manual

LED STATUS LIGHTS
Charging LED
No light:
Red:
Green:
Wi-Fi LED
Blue:
Flashing Blue:
Drive Activity LED
No light:
White/ Flashing White: When the drive is powered on and the Hard Drive or
Pink:
Note: This LED will also turn pink if "hard reset" has been performed using the
reset button.
Warning - Do not power off the unit while the White LED is flashing to avoid losing data.

CHECK THE BATTERY CHARGE STATUS

To check the status of the battery charge at any time, press the 'BATT. CHECK' button on the
side of the unit. The LEDs will light up to show the approximate charge remaining from 0% to
100%, in 25% increments.
For use in the UK and Europe:
Install the proper EUR or UK AC power plug clip, both included in the unit box contents, to the
end of the power adapter cable for your location. The clip simply snaps onto the existing
plug. The AC adapter automatically provides the proper voltage required.
For use in USA or Canada, no action is necessary. The unit is ready to use out of the box.
When not charging.
Charging via using power adapter.
Device is fully charged.
Wi-Fi is ON.
Wirelessly transferring data.
Drive is in sleep mode / not installed / not active.
SSD Drive is active.
When 10% battery power left (at this point it is
recommended to charge your device via the included
power adapter).
4