1. Manuals
  2. Brands
  3. Faroudja Manuals
  4. Projector
  5. FDP-DILA1
  6. Installation and operation manual

Faroudja FDP-DILA1 Installation And Operation Manual

Home theater optimized
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Home Theater Optimized
FDP-DILA1
Installation and
Operations Manual
NOTICE: THIS PROJECTOR HAS BEEN SIGNIFICANTLY
MODIFIED AND OPTIMIZED TO PRODUCE VERY HIGH
QUALITY IMAGES USING THE FAROUDJA PROCESSOR.
ANY CHANGES MADE TO THESE SETTINGS CAN CORRUPT
THIS PROCESS. RESETTING THE OPTIMIZATION IS NOT
COVERED UNDER WARRANTY.
™

Advertisement

Table of Contents
loading

Related Manuals for Faroudja FDP-DILA1

Summary of Contents for Faroudja FDP-DILA1

  • Page 1 Installation and Operations Manual NOTICE: THIS PROJECTOR HAS BEEN SIGNIFICANTLY MODIFIED AND OPTIMIZED TO PRODUCE VERY HIGH QUALITY IMAGES USING THE FAROUDJA PROCESSOR. ANY CHANGES MADE TO THESE SETTINGS CAN CORRUPT THIS PROCESS. RESETTING THE OPTIMIZATION IS NOT COVERED UNDER WARRANTY.

  • Page 2: Safety Precautions

    Thank you for purchasing this projector. Before using it, read and follow all instructions carefully to take full advantage of the projector's capabilities. SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This WARNING : unit has been engineered and manufactured to assure TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT your personal safety.
  • Page 3 SAFETY PRECAUTIONS (Cont.) – The product should be placed more than one foot away – This product should be operated only with the type of from heat sources such as radiators, heat registers, power source indicated on the label. If you are not sure stoves, and other products (including amplifiers) that of the type of power supply to your home, consult your produce heat.

  • Page 4: Table Of Contents

    Contents SAFETY PRECAUTIONS ......2 Operating the Setting Menu ....31 Making Basic Settings ......... 31 Accessories ..........5 Operating the Main Menu ....... 32 Controls and Features ......6 Configuration of the Main Menu ......32 Front Side / Top Surface / Right Side ....6 Operating the Main Menu (Basic Operation of the Left-hand side ............

  • Page 5: Accessories

    Accessories The following accessories are included with this projector. Check for them; if any item is missing, please contact your dealer. Remote control unit (RM-M10G) AAA/R03-size dry cell battery (×2) Power code (for checking operation) [approx. 2.5 m (8.2 ft)] AV connection cable Personal computer connection cable Audio cable...

  • Page 6: Controls And Features

    Controls and Features Front Side / Top Surface / Right Side Control panel Adjustable foot (for adjusting upper/lower angles) For details, refer to “Control Panel” (page 9). It is adjusted to be level when shipped from the factory. Turning to extend the foot allows adjustment up to + 7°. Exhaust vents Vents for cooling fans through which warm air comes out.

  • Page 7: Left-Hand Side

    Controls and Features (cont.) Left-hand side AC IN (power input) terminal Adjustable foot (for horizontal angle adjustment) This is the power input terminal where the supplied power It is set at the shortest position when shipped from the cord is connected. For details, refer to page 24. factory.

  • Page 8: Bottom Surface

    Controls and Features (cont.) Bottom Surface Air intake area (filter) Opening for replacing the light-source lamp Air is taken in through this area to cool the light-source For replacing the light-source lamp, refer to “Replacing the lamp. If this area is blocked or if something that obstructs Light-Source Lamp”...

  • Page 9: Control Panel

    Controls and Features (cont.) Control Panel Lamp indicator STAND BY : After the light-source lamp has been used for more than approx. 900 hours. Blinking : Replace the lamp. Refer to “Replacing the Light- Source Lamp” on page 48. OPERATE TEMP indicator LAMP ON: The temperature inside the projector has abnormally...
  • Page 10 Controls and Features (cont.) Control Panel (Cont.) QUICK ALIGN. button While a menu screen is shown, use this button to adjust STAND BY the values for the item selected. When no menu is shown, the quick alignment function works. • When a menu is shown OPERATE + 3 button: The value for the selected item increases.

  • Page 11: Connector Panel

    Controls and Features (cont.) Connector Panel VIDEO AUDIO AUDIO AUDIO /B-Y /R-Y COMPUTER AUDIO OUT REMOTE RS-232C Y/C (S video) input terminal (Mini DIN 4 pin) AUDIO OUT (audio output) terminal (stereo mini jack) Connect this terminal to the S video output terminal of a Of input signals inputted to the projector, the audio signal video deck, etc.
  • Page 12 Controls and Features (cont.) Connector Panel (Cont.) VIDEO AUDIO AUDIO AUDIO /B-Y /R-Y COMPUTER AUDIO OUT REMOTE RS-232C COMPUTER IN (computer input) -2 terminal (BNC) COMPUTER IN (computer input) -1 terminal (D-sub 3- These are input terminals for analog RGB signals, vertical row 15 pin) sync (V) signals, and horizontal sync (H) signals / This is an input terminal (PC) dedicated for computer...

  • Page 13: Remote Control Unit

    Controls and Features (Cont.) Remote Control Unit OPERATE COMPUTER VIDEO VOL. ZOOM FOCUS MENU/ENTER PAGE BACK PRESET QUICK ALIGN. MUTING Remote control’s signal transmitter QUICK ALIGN. (Quick Alignment) button COMPUTER button Use this button to automatically adjust TRACKING, Use this button to select the devices connected to the PHASE, H.

  • Page 14: Installing Batteries

    Controls and Features (cont.) Installing Batteries Install batteries in the remote control. If the remote control has started to work erratically, replace the batteries. Open the back cover. Precautions for using batteries While pushing on the back cover, slide it in the direction If batteries are used incorrectly, they may crack or of the arrow.

  • Page 15: Installing The Projector

    Installing the Projector Precautions for Installation CAUTION Do not install the projector in the following places : • There is much water, humidity or dust. • The projector may be subjected to oil smoke or cigarette smoke. • On a soft surface such as a carpet or cushion. •...

  • Page 16: Projection Distance And Screen Size

    Installing the Projector (Cont.) Projection Distance and Screen Size The projector’s projection lens is a zoom lens of about 1.5 x. The screen size at the maximum enlargement is 1.5 times that of the minimum size. The projection distance that can be focused is 2.5 to 20 m. Install the projector within this range. Change of projection screen Screen according to aspect ratio...

  • Page 17: Relationship Between Projection Distances And Projection Screen Sizes

    Installing the Projector (Cont.) Relationship between Projection Distances and Projection Screen Sizes For 4 : 3 aspect ratio screens Projection screen size (diagonal length) Projection distance Minimum projection screen size (Tele end) Maximum projection screen size (Wide end) 8.2 ft (2.5 m) 42”...

  • Page 18: Effective Range And Distance Of The Remote Control Unit

    Turn the “position selecting screw for ceiling mounting” counterclockwise fully (until it is turning idly). [To again use the projector in a normal desktop setting] Turn the “position selecting screw for ceiling mounting” clockwise fully (until it tightens firmly). Note: The FDP-DILA1 has been For normal desktop mounting: optimized for the proper Turn clockwise.

  • Page 19: Connecting To Various Devices

    70.1Hz Non-interlace 1024 × 768 (Macintosh 19”) 60.2kHz 74.9Hz Non-interlace 1152 × 870 (Macintosh 21”) 68.7kHz 75.0Hz Non-interlace 1360 × 1024 Faroudja (SXGA1) 64.0kHz 60.0Hz Non-interlace5 1280 × 1024 (SXGA2) 70.8kHz 67.0Hz Non-interlace 1360 × 1024 (SXGA3: Mac Board) 80.0kHz 75.1Hz...

  • Page 20: Connecting To Video Devices

    Connecting to Various Devices (Cont.) Connecting to Video Devices Before connection, be sure to turn off both the projector and video device. • Read the manual which comes with each video device thoroughly. • Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied. Video devices S video cable •...

  • Page 21: Connecting To Other Devices

    Connecting to Various Devices (Cont.) Connecting to Other Devices Before connection, be sure to turn off both the projector and other devices to be connected. • Read the manual thoroughly which comes with the device to be connected. • Speakers with a built-in amplifier and game devices can be connected. Use the AV connection cable and audio cable supplied, or the cable supplied with a game device.

  • Page 22: Connecting To Computer Devices

    Connecting to Various Devices (Cont.) Connecting to Computer Devices Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly. Connection to an IBM PC or IBM-compatible computer •...
  • Page 23 Connecting to Various Devices (Cont.) Connecting to Computer Devices (Cont.) Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly. Connection to Macintosh • Use the supplied Personal computer connection cable and the supplied conversion adapter for Mac. •...

  • Page 24: Connecting The Power Cord (Supplied)

    Connecting to Various Devices (Cont.) Connecting the Power Cord (Supplied) After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet. 1 Insert the supplied power cord into the power input terminal (AC ) of the projector.

  • Page 25: When Turning On The Devices Connected To The Projector

    After the fans have stopped, turn off the MAIN POWER switch and pull out the power cord. After that, re-insert the power cord and try to operate the projector. If it goes into emergency again, after the fans have stopped, turn off the main power switch, pull out the power cord, and consult your Faroudja-authorized dealer or Faroudja service center for repair.

  • Page 26: Basic Operations

    Basic Operations Projector’s buttons The following describes the basic procedure for normal use of the projector. 1. Turning on the Power STAND BY indicator STAND BY OPERATE indicator 1 Turn on the MAIN POWER switch. OPERATE button OPERATE 2, 1 ON [ ]:The main power turns on and the STAND BY LAMP indicator comes on.

  • Page 27: Select The Video Input To Be Projected

    Basic Operations (Cont.) Projector’s buttons 2. Select the video input to be projected STAND BY Press the VIDEO button or the COMPUTER button to switch the input. • Each time you press either button, the selected input changes as OPERATE follows.

  • Page 28: Adjust Focus

    Basic Operations (Cont.) Remote control unit 4. Adjust focus Adjust focus with the remote control’s FOCUS (+/–) buttons. To focus on farther points: OPERATE COMPUTER VIDEO Press the FOCUS (+) button. To focus on nearer points: Press the FOCUS (–) button. Remote control unit VOL.

  • Page 29: For Operating Other Functions

    Basic Operations (Cont.) Remote control unit ¶ For Operating Other Functions To turn off video image and audio sound temporarily Press the AV MUTING button. Press once: OPERATE COMPUTER VIDEO Video image and audio sound turn off (do not come out). Press again: Video image and audio sound come out again.
  • Page 30 Basic Operations (Cont.) Projector button To display the SETTING menu The setting menu is used to make basic adjustments and settings (TRACKING, PHASE, H. POS., V. POS., FOCUS, ZOOM and STAND BY AUDIO-VOL.) of the video picture being projected after installation (connection) or after inputs are switched.

  • Page 31: Operating The Setting Menu

    Operating the Setting Menu Making Basic Settings Here, we make basic video adjustment and sound volume Projector’s buttons adjustment which are set up after installation (connection). EMERGENCY Notes • This adjustment menu (setting menu) can be displayed with only the VIDEO projector’s button.

  • Page 32: Operating The Main Menu

    Configuration the Main Menu (AV Input) For computer inputs, see the following page. NOTICE: THIS PROJECTOR HAS BEEN OPTIMIZED BY FAROUDJA. DO NOT ADJUST SETTINGS THAT AFFECT IMAGE LEVELS. USE THE CONTROLS IN THE FAROUDJA PROCESSOR FOR SETTING LEVELS. USING PROJECTOR CONTROLS FOR GEOMETRY SETUP IS OKAY.
  • Page 33 Operating the Main Menu (Cont.) Configuration of the Main Menu (Computer-related input) Main menu (Computer-related inputs : During COMPUTER IN-1 or -2 input signal) PIXEL CLOCK TRACKING : The lateral size and display area of video image are adjusted. PHASE : Flickering or dim video image is adjusted.

  • Page 34: Operating The Main Menu (Basic Operation Of The Main Menu)

    Operating the Main Menu (Cont.) Operating the Main Menu (Basic Operation of the Main Menu) Remote control unit For projector’s menus, the setting menu and the main menu are available. Here, we explain about the operation of the main menu. (see pages 34 to 47) For the setting menu, refer to “Making Basic Settings”...

  • Page 35: Changing The Color System

    Operating the Main Menu (Cont.) Changing the Color System Remote control unit AUTO is set for the color system when the projector is shipped from the factory. Normally, use it in AUTO. If operation in AUTO is unstable such as with color not being shown, set to a dedicated color system in accordance with the color system of the signal being input.

  • Page 36: Changing The Language Display

    Operating the Main Menu (Cont.) Changing the Language Display Remote control unit The language in the menu display is set to English when shipped from the factory. When you want to change to another language, set it as follows. Press the MENU/ENTER button. MENU/ENTER button •...

  • Page 37: Adjusting The Pixel Clock

    Operating the Main Menu (Cont.) Adjusting the Pixel Clock Remote control unit The pixel clock should be adjusted mainly for computer-related inputs. (Normally, it does not need to be adjusted for video inputs.) If a wide stripe appears on the screen, adjust the lateral size of video image and the display area (tracking adjustment) so the stripe disappears.

  • Page 38: Adjusting The Screen Position

    Operating the Main Menu (Cont.) Adjusting the Screen Position Remote control unit Adjust the position of the screen if it is displaced. Press the MENU/ENTER button. • The main menu appears on the screen. MENU/ENTER button Select “POSITION” with the cursor OPERATE COMPUTER VIDEO button 5 or ∞...

  • Page 39: Adjusting Picture Quality

    Operating the Main Menu (Cont.) Adjusting Picture Quality I Remote control unit NOTICE: THIS PROJECTOR HAS BEEN OPTIMIZED BY FAROUDJA. DO NOT ADJUST SETTINGS THAT AFFECT IMAGE LEVELS. USE THE CONTROLS IN THE FAROUDJA PROCESSOR FOR SETTING LEVELS. MENU/ENTER button Press the MENU/ENTER button.
  • Page 40 Operating the Main Menu (Cont.) Adjusting Picture Quality (Cont.) Make adjustment with the cursor IRemote control unit button NOTICE: THIS PROJECTOR HAS BEEN OPTIMIZED BY FAROUDJA. DO NOT ADJUST MENU/ENTER button SETTINGS THAT AFFECT IMAGE LEVELS. OPERATE COMPUTER VIDEO USE THE CONTROLS IN THE FAROUDJA PROCESSOR FOR SETTING LEVELS.
  • Page 41 NOTICE: THIS PROJECTOR HAS BEEN • Adjustment items (on the PICTURE menu) are different when OPTIMIZED BY FAROUDJA. DO NOT ADJUST AV signals are input and when computer-related signals are SETTINGS THAT AFFECT IMAGE LEVELS.

  • Page 42: Adjusting Sound Quality

    Operating the Main Menu (Cont.) Adjusting Sound Quality Remote control unit Adjust the quality (treble/bass) of sound. Press the MENU/ENTER button. • The main menu appears on the screen. MENU/ENTER Select the “SOUND” with the cursor button OPERATE COMPUTER VIDEO button 5 or ∞...

  • Page 43: Setting And Adjusting Other Functions (Options)

    Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) Remote control unit The following optional functions can be set (adjusted). • MENU AUTO OFF • LINE DISPLAY • RIGHT LEFT REV. • TOP BOTTOM INV. • CLAMP • RESIZE •...
  • Page 44 Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) Set (adjust) the desired item with the Remote control unit cursor button 2 or 3. • To adjust multiple items, repeat steps 4 and 5. Adjustment item Button Adjustment content MENU/ENTER Sets whether to clear the menu display...
  • Page 45 Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) Remote control unit Adjustment item Button Adjustment content Sets background color when there is no input signal. (Factory setting : BLUE) BLUE CYAN BLACK GREEN BACK COLOR MENU/ENTER button YELLOW MAGENTA...

  • Page 46: Changing (Setting) The Source

    Operating the Main Menu (Cont.) Changing (Setting) the Source Remote control unit Normally, use the source setting in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal.
  • Page 47 Operating the Main Menu (Cont.) Changing (Setting) the Source (Cont.) Press the MENU/ENTER button to set Remote control unit (fix) it. When AUTO is selected: The main menu is automatically cleared, completing the MENU/ENTER button setting procedure, and the source display inputted appears. OPERATE COMPUTER VIDEO •...

  • Page 48: Replacing The Light-Source Lamp

    If video image is dark and its color tint is extraordinary even after you have adjusted color tint and brightness, replace the light-source lamp a little earlier. Purchase new light-source lamps (part No. : BHL5001-SU) from the Faroudja dealer where you have purchased the projector, or contact Faroudja service.
  • Page 49 Replacing the Light-Source Lamp (Cont.) Loosen the lamp-unit screws, raise the handle, and pull out the lamp Screw unit. Loosen the two screws with a flat-end screwdriver. Note • The screws are fitted so that they do not come off the lamp- unit.

  • Page 50: Resetting The Lamp Use Time

    Replacing the Light-source Lamp (Cont.) Resetting the Lamp Use Time After replacing with a new light-source lamp, reset the counter inside the projector. This works to reset the life calculation of the light-source lamp, allowing the used time of the new light-source lamp to be accumulated. Turn on the MAIN POWER switch Projector’s button to go into stand-by mode.

  • Page 51: Cleaning And Replacing The Filter

    (part No.: LC30208). Otherwise, dirt may get inside and appear on the screen, possibly preventing you from enjoying the video image fully. If dirt gets inside or if you need information about the filter, consult your Faroudja dealer where you have purchased the projector or Faroujda service. Turn off the MAIN POWER switch.

  • Page 52: Troubleshooting

    Troubleshooting Solutions to common problems related to your projector are described here. If none of the solutions presented here solves the problem, unplug the projector and consult a Faroudja-authorized dealer or Faroudja service. Symptom Probable cause Corrective action Page Power is not supplied.
  • Page 53 Symptom Probable cause Corrective action Page The upper part of the • While computer system signal is input, • Input separate sync signals for vertical video image bows or isn’t a sync signal for composite sync sync (V) and horizontal sync (H) distorts.

  • Page 54: Specifications

    Specifications Optical mechanism system • Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method 0.9" measured diagonally (1365 ×1024 pixels) × 3 (Total number of pixels : 4,193,280) • D-ILA device Electric-driven zoom of 1.5 × • Projecting lens •...
  • Page 55 Specifications (Cont.) Horizontal sync/composite sync signal (H/Cs) : 1 to 5Vp-p, high impedance (positive/negative polarity) : 1 to 5Vp-p, high impedance (positive/negative polarity) Vertical sync signal (V) : 1 to 5Vp-p, high impedance (positive/negative polarity) * Some connected devices may not correspond to composite sync (Cs) or G on sync signal. 1-line, stereo mini-jack ×...

  • Page 56: Outside Dimensions

    Specifications (Cont.) Outside dimensions (425)* Unit: Inch (mm) *1: Protrusion excluded φ 4- ( φ 104) (133)* Front Side (425)* (375) (168) (361) (231) (205)* (55.5) DTV-format signals * The following are DTV-format signals that can be input. DTV-Formats 480i 480p 720p 1080i...
  • Page 57 Specifications (Cont.) Pin assignment (Specifications for terminals) Y/C terminal Pin number Signal name GND (Y) GND (C) RS-232C terminal Pin number Signal name Pin number Signal name COMPUTER IN-1 (PC) / COMPUTER OUT Terminal Pin number Signal name Pin number Signal name Green GND (SYNC)
  • Page 58 All warranty claims should be made at the place of purchase. No products may be returned to Faroudja without its consent. If requested by Faroudja, purchaser agrees to provide proof of purchase and to return defective products to Faroudja, transportation charges prepaid. Faroudja’s only liability with respect to products that do not meet the foregoing warranty, and for which appropriate transportation arrangements have been made, will be to repair or, at Faroudja’s option, replace defective...

Table of Contents