Charging; Getting Started - Halo StarLight 3000 Operating Instructions Manual

Getting Started

Charge the HALO Pocket Power StarLight 3000 until the
LED displays a solid green light (no lights should be
ashing). This will take up to six hours and will uctuate
depending on the charging power source.
IMPORTANT: Charge your HALO charger for a full
six hours before regular use. Subsequent charging
will take ve - six hours.
Charging the HALO Pocket Power StarLight 3000
Using the supplied HALO Charge It Charge Me cable,
plug one USB connector into the HALO charger and
plug the other USB connector into a computer or an
AC power source with a USB 5V input.
While charging the HALO charger, the LED will ash
one of the following colors, indicating the charge level.
Red (1%-33%), orange (34%-66%), and green
(67%-99%). When the HALO charger is 100% fully
charged the green LED will become illuminated and
no longer ash. When the charger is not in use, slide
the power switch to the OFF (lower) position to
conserve the battery.
The charging cable works in either direction (see
Figure 1 for reference). Connect A to the power source