Advertisement
Advertisement
Related Manuals for Halo ACDC BOLT 58830
Summary of Contents for Halo ACDC BOLT 58830
- Page 1 ® Contains a 58830 mWh battery PLEASE READ BEFORE OPERATING THIS EQUIPMENT...
- Page 2 HALO BOLT ACDC 58830 Thank you for choosing HALO! Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can safely jump start your car or charge your laptop. In addition, you can use it to charge your phone, tablet or other electronic devices! The HALO BOLT ACDC 58830 also features a convenient LED oodlight.
-
Page 3: Safety Precautions
• Remove jump start clamps from vehicle battery after jump starting vehicle. • Keep your HALO BOLT ACDC 58830 dry and away from moisture and corrosive materials. The HALO BOLT ACDC 58830 should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements. - Page 4 Incorrect reassembly may result in shock or re hazard. • Do not drop or subject to strong impacts. Do not operate your HALO BOLT ACDC 58830 if it has received a sharp blow, or has otherwise been damaged in any way.
-
Page 5: Table Of Contents
TABLE OF CONTENTS Safety Precautions Included Items 7-15 Operating Instructions 11, 13 Troubleshooting Guide Speci cations Warranty and Contact Information POWER YOUR LIFE | 5... -
Page 6: Included Items
INCLUDED ITEMS - HALO BOLT ACDC 58830 - Car Charger - Jumper Cables - AC Wall Charging Adapter - USB to Micro USB Cable - Operating Instructions - Carrying Pouch 5V/2.4A 5V/2.4A INPUT JUMP JUMP START START LOCATION OF CONTROLS... -
Page 7: Operating Instructions
AC adapter tip into the charge input. Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC 58830 will automatically begin charging. When the HALO BOLT ACDC 58830 is fully charged, all four indicator lights will be solid green (This could take up to 9 hours). - Page 8 When your HALO BOLT ACDC 58830 is on, the LED indicator lights will display the power level. HALO BOLT ACDC 58830 POWER LEVEL INDICATORS INDICATOR LIGHTS HOW TO READ AMOUNT OF CHARGE One solid light 0%-25% Two solid lights 26%-50%...
- Page 9 If the jump start button ashes red, the jumper cables have been connected incorrectly. If this ashing red condition occurs, disconnect the jumper cables from the HALO BOLT ACDC 58830 and vehicle battery and restart the process from Step 1.
- Page 10 You must allow up to 15 seconds between each jump start attempt. During the 15 seconds, the jump start button will ash green while the HALO BOLT ACDC 58830 performs its safety checks. Once the jump start button illuminates solid green, the HALO BOLT ACDC 58830 is ready for the next jump start attempt.
-
Page 11: Troubleshooting Guide
(-) HALO BOLT ACDC 58830 Jump Start Check the jumper cables and ensure The HALO BOLT ACDC 58830 is waiting they are properly connected to the to be connected to a battery. button ashes green battery. - Page 12 A ashing green light indicates safety checks are in progress. If you see a ashing red light, the device you connected is rated for greater than 65 watts and cannot be powered using the HALO BOLT ACDC 58830. The HALO BOLT ACDC 58830 will automatically power o after 30 minutes of inactivity.
- Page 13 HALO BOLT ACDC than 65 watts HALO BOLT ACDC 58830 58830 AC button The HALO BOLT ACDC 58830 is not ashes red Recharge the HALO BOLT ACDC su ciently charged to power the 58830...
- Page 14 HALO BOLT ACDC 58830 USB 5V/2.4A Output ports. NOTE: If your electronic device does not have a Micro USB Input, your HALO BOLT ACDC 58830 is also compatible with the charging cable provided with your electronic device. To use, plug the Standard USB end of the cable into either one of the two 5V/2.4A USB Output ports...
- Page 15 HALO SMART CHARGE TECHNOLOGY Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE TECHNOLOGY to achieve higher compatibility for charging standard 5V USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will allow the HALO BOLT ACDC 58830 to communicate with your electronic device and provide the fastest and safest charge for that device.
-
Page 16: Speci Cations
SPECIFICATIONS Battery Cell: 3x Li-Polymer 5300mAh Battery Pack Power: Contains a 58830 mWh battery Input: DC 14V/0.85A USB Output: 2x USB 5V/2.4A AC Output: 1x AC output port 115V (65 Watts) Dimensions: 182 x 97 x 40mm Weight: 754 g COMPLIANCE WITH FCC REGULATION This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. - Page 17 CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certi ed peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certi ed peripherals or non-shielded cables may result in interference to radio or reception.
-
Page 18: Warranty And Contact Information
Conditions are as follows: • During the rst 90 days from date of purchase, HALO will repair or replace the defective product. • HALO will, subject to inspection, repair the defective product or replace it with a new or reconditioned unit. - Page 19 POWER YOUR LIFE | 19...
- Page 20 910 W LEGACY CENTER WAY STE. 500, MIDVALE, UTAH 84047 WWW.ZAGG.COM/HALO © 2020 ZAGG Inc | www.ZAGG.com/HALO All trademarks are the property of ZAGG Inc. All rights reserved. ZAGG Inc | 910 W Legacy Center Way, Ste. 500, Midvale, Utah 84047...
Need help?
Do you have a question about the ACDC BOLT 58830 and is the answer not in the manual?
Questions and answers
Halo bolt is fully charged but will not turn on.
The HALO BOLT 58830 may shut off unexpectedly if it detects a high temperature condition. In this case, disconnect the device and allow it to cool for several minutes before trying again.
This answer is automatically generated
My Halo Bolt shows fully charged when plugged in to charge, but when I take it off the charge, it will not do anything, it shows a fully charged 4 green lights.
If your HALO BOLT ACDC 58830 shows fully charged but does not function when unplugged, possible reasons include:
1. Battery Damage: If the device has been subjected to strong impacts, mechanical shock, or improper use, the battery may be damaged and unable to hold a charge.
2. Incorrect Charging Method: Ensure you are using the specified charging adapter provided with the unit. Using non-HALO-branded accessories may cause issues.
3. Internal Fault: If the device has experienced a sharp blow or other damage, internal components may be malfunctioning.
4. Safety Feature Activation: The device automatically powers off after 30 minutes of inactivity. Ensure you are actively using it when testing.
If the issue persists, the battery or internal components may need servicing or replacement.
This answer is automatically generated
Why does my halo only have three out of four lights turning green?The third light is not on. One and two and four are green. Has been plugged and in for hours.
The third light on your HALO BOLT ACDC 58830 may not be turning green because the device is not yet fully charged. The manual states that all four indicator lights will be solid green when the HALO BOLT ACDC 58830 is fully charged, which can take up to 9 hours. Keep the device connected to the AC adapter and allow it more time to charge.
This answer is automatically generated
My Halo ACDC Bolt 58830 has been plugged in over 24 hours but fourth green line is still blinking. (When first plugged in 1st line was the only one not blinking. Other two now solid, non-blinking). Does this mean it will no longer work at 100% power?
Can I purchase the AC wall adapter separate? I've lost mine so cannot charge my device
Can you order the instruction manuals
Halo is fully charged. When plugging into Nespresso machine with 110, it starts with green and suddenly goes to red light flashing. What does this mean? Why will it not work on a 110 volt system. Seems to work with everything else. Only a year old.
A flashing red light on the HALO BOLT ACDC 58830 indicates that the connected device exceeds the 65-watt limit. If a Nespresso machine is used on a 110-volt system and triggers a flashing red light, it likely requires more than 65 watts and cannot be powered by the HALO BOLT ACDC 58830.
This answer is automatically generated