Safety Precautions RISK OF ELECTRICAL SHOCK DO NOT OPEN THE LIGHTNING FLASH WITH AR- ROWHEAD SYMBOL WITHIN AN EQUI- LATERAL TRIANGLE IS INTENT TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Caution For safety, please use the original box and packing materials, and keep the mode of packing same as the original. When you repackage this product. Do not place this product near the volatile liquid such as insecticide. It is normal for the cover and rear panel become warm after the player has been operating for a long time.
Features Dual Decoding: Dolby Digital AC-3 and DTS Decoding Full compatibility with DVD, SVCD, VCD, CD, MP3, and Kodak picture CD on CD-RW & CD-RW (finalised) Screensaver Multiple playback modes: Memory, Program, Search, 10-Second Review Dynamic spectrum display and 6 frequency bands adjustable 5.1 CH, 2 CH, Optical and Coaxial digital output...
Front panel and Rear panel illustrations Front panel power echo control mic jacks volume control Rear panel down-mix right surround right main centre right s-video main output woofer left optical surround coaxial output left output down-mix left disc tray composite video output Introduction...
VFD Illustrations The figure above shows the front panel with all the displays on. 1. DVD indicator 2. DTS indicator 3. SVCD-VCD indicator 4. DOLBY indicator 5. Multi-angle indicator 6. PBC indicator 7. MP3 indicator 8. Time indicator 9. Track indicator 10.
Connecting to a TV Set Connections Notes: Set player's Analog Out mode to "2 Channel" in the audio setup page. (See page 17) There are three ways of connecting the player's AV output to the TV set. 1. S-video cable and left/right audio cable. (Set the [Video Type] to [CVBS S-Video]) 2.
Connecting to an AV amplifier with 2 channel analog audio input Notes: 1. Set player's Analog Out mode to "2 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3.
Connecting to an AV amplifier with 5.1 channel analog audio input Notes: 1. Set player's Analog Out mode to "5.1 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3.
1. Set player's Digital Out mode to "PCM" or "Raw" in the audio set up page (See page 18). 2. Set either the Optical or the Coaxial digital audio output. 3. Set the amplifier to the AV input connected to the DVD player. Connections...
1. Connect your DVD player to the TV and amplifier. 2. Turn on the TV. 3. Set the TV to the AV input connected to the DVD Player. 4. Turn down the volume on your amplifier, then power it on.
Modes and Features Setup ON SCREEN DISPLAY (OSD)/SETUP In stop mode, press OSD/SETUP, and the TV screen will display the setup menu as the following: Language Setup Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu: Press select the menu items.
Page 16
Modes and Features Setup Language Setup 2. Select [DVD Subtitle], and press ENTER or Note: Subtitle languages vary by disc. 3. Select [DVD Audio], and press ENTER or Note: Audio languages vary by disc. 4. Select [DVD Menu], and press ENTER or Note: Menu languages may vary by disc.
Page 17
Modes and Features Setup Video Setup Select [Video] in the Setup Menu, and press ENTER to display the [Video] submenu: Press select the menu item. A. Press ENTER or B. Press RETURN or 1. Select [TV Aspect], and press ENTER or [4:3 Letter Box] - The full width of the picture is displayed on a standard 4:3 [4:3 Pan Scan] - The full height of the picture is displayed an a standard 4:3 [16:9] -------------- The picture fills the screen of a wide screen (16:9) television.
Page 18
Modes and Features Setup Video Setup 3. Select [Video Type], and press ENTER or [CVBS S-Video] ---- S-Video output. [CVBS YCbCr] ---- Component video output. Note: The Composite video output is always available. Audio Setup Select [Audio] in the Setup Menu, and press ENTER to display the [Audio] submenu: Press select the menu item.
Page 19
Modes and Features Setup Audio Setup 3. Select [Digital Out], and press ENTER or [PCM] --- Digital audio output in PCM (pulse code modulation) format; use for stereo [Raw] --- Digital audio out in original format; use if you connect to an AV receiver [Off] ----- No digital audio out.
Page 20
Modes and Features Setup Rating Setup Select [Rating] in the Setup Menu, and press ENTER to display the [Rating] submenu: Press select the menu item. A. Press ENTER or Note: Not all DVDs support ratings. 1. Use the 0-9 keys to input four digits, then press ENTER to confirm The [Rating] submenu displays as follows: Note: If you forget your password, please use the universal password (listed on the 2.
Page 21
Modes and Features Setup Other Setup Items 1. Select [Screen Saver], and press ENTER or 2. Select [Auto Power Off], and press ENTER or 3. Select [Back Color], and press ENTER or 4. Select [Display Mode], and press OK or [Time] ---- Time indicator on VFD displays the time.
Remote Control Operation STANDBY/ON During the playback, press STANDBY/ON to stop the player and return to standby mode. While the player is in standby, press STANDBY/ON or any key on the front panel to resume normal operation. TITLE During DVD playback, press TITLE to display the DVD title menu, or play from the first title.
Page 23
Remote Control Operation OSD/SETUP During playback, press OSD/SETUP key to display the current time of the disc playing. Elapsed time of the current track/chapter Press OSD/SETUP again to display the additional information of the disc playing. Disc type Disc type Current title Audio type Subtitle...
Page 24
Remote Control Operation 0-9 Keys These keys are used to input the time, as well as title, chapter and track numbers. When a numeric item is displayed on the screen, press 0-9 keys to select the desired entry, and press ENTER to confirm. When a CD and VCD is playing (with PBC off), press 0-9 keys to select a track directly, then press ENTER to confirm.
Page 25
Remote Control Operation SEARCH Use the number keys to input the desired [Time], [Relative-Time] or [Title/Chapter] then press ENTER to confirm. Notes: 1. During CD playback, press SEARCH to display the [Track Search] menu, Notes: 1. Time searches for an exact time in a movie. Relative time searches and press it again to display the [Disc Search] menu.
Page 26
Remote Control Operation CLEAR Press CLEAR key to delete the number you have entered. Press once to delete one digit, Press and hold to delete all digits. PAUSE/STEP Press PAUSE/STEP during playback to pause playback. Press PAUSE/STEP again to step forwards one frame. Press PLAY to resume normal playback.
Page 27
Remote Control Operation RETURN During VCD or SVCD playback (with PBC on), press RETURN to return to the program menu. In the Setup Menu, press RETURN to return to the main menu. Press it in some menus, pressing RETURN cancels the current display. During playback, press A-B key to select point A.
Page 28
Remote Control Operation PLAY MODE Press PLAY MODE to display the [Play Mode] menu: 1. Select [Repeat], and press ENTER or A. Press ENTER to confirm. B. Press PLAY MODE or RETURN to exit the menu. Note: PBC (Playback Control used to navigate VCDs) is not available for CDs. 2.
Page 29
Remote Control Operation While [Program] is on, press ENTER to display the [Program] submenu: Input the track numbers in the order you would like them to play. When finished select [Play] and press ENTER to play the tracks in the new programmed order. To clear all the numbers you have entered select [Clear All] and press ENTER.
Page 30
Remote Control Operation ENHANCE Enhanced Features Timer Edge Enhance Bright Enhance Note: Enhanced Features are not available during MP3 playback. EQUALIZER The equalizer allows you to adjust 6 frequency bands independently. Graphic Equaliser Note: Not available for DVD, MP3, VCD or SVCD playback. A.
Page 31
Remote Control Operation CHANNEL Press CHANNEL, and the [Channel Setup] menu will display as follows: Press ENTER repeatedly to change the selection. When Karaoke is off: You can change four channel modes: Stereo/Left/Right/Mix. When Karaoke is on: (1) You can select: Stereo/Left/Right/Mix/Partner Left/Partner Right, during CD/VCD/SVCD playback.
Page 32
Remote Control Operation ZOOM During VCD/SVCD/DVD playback, press ZOOM to magnify the image as follows: ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. SUBTITLE During DVD playback Press SUBTITLE repeatedly to select from up to 32 subtitle languages.
Enjoying Karaoke KARAOKE Press KARAOKE key, the screen will display as the following: Karaoke: on Note: When Karaoke is off, press KARAOKE key, and Karaoke will be on. When Karaoke is on, press KARAOKE key, and Karaoke will be off. Set the player as the following, then you can enjoy Karaoke.
MP3 Playing Supported formats Disc format: ISO 9660, Joliet Music file formats: MP3 MP3 bit rate (data rate): 32--320kbps Total number of music files and albums: around 350 per disc Sampling rate: 32kHz/44.1kHz/48kHz Note: The player will not identify or play MP3 discs under the following conditions: recording format is not supported, badly scratched or deformed disc, MP3 recorded in CD-R or CD-RW which is not finalised, or a dirty pick-up When an MP3 disc is loaded, the screen will display as follows: Directory...
The introduction of KODAK PICTURE CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking the box on the photo finishing envelope when you drop off a roll of film (35mm or Advanced Photo System (APS) colour print film) at the time of processing in Kodak Express store displaying "Kodak Picture...
Page 36
KODAK Picture CD Playback Zoom Function: The player provides both Zoom in/out and pan function, The picture will zoom in/out as follows: Note: During the ZOOM function, slideshow transitions and image rotation are disabled. Q off: close zoom, press PLAY key to resume slideshow transitions.
Troubleshooting Please read the user's manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact our company or the technical service centre authorised by us.
Specifications Power requirements: 110-240V 50/60Hz Power consumption: 25W Video Standard: Auto Unit Weight: 2.9 kg Unit Dimensions: 430mm (W) x 260mm (D) x 65 mm (H) Video out Video out: 1.0V(p-p)/75 sync, negative polarity, RCA pin Jack x 1 S-video output connector (separate Y, C signal output connector): Y output: 1.0V(p-p)/75 sync, negative polarity C output: 0.286V(p-p)/75...
Remote Control Preparation Insert batteries 1. Open the cover. 2. Insert batteries. Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3. Close the cover. Notes: Improper use of batteries may cause battery leakage and corrosion.