Deleting The Scheduled Record List; Using The Video Plus+Feature - Samsung DVD-R150 Instruction Manual

DVD-Recorder
DVD-RW(VR)
No. Source Day Start End Speed PDC Edit
01 PR 01 SAT 01
02 PR 01 SUN 01
03 /
Do you want to delete 'No.01' ?
Yes
MOVE OK
DVD-Recorder
DVD-RW(VR)
Title List
VideoPlus+
Playlist
Scheduled Record List
VideoPlus+ Extended : Off
Disc Manager
Programme
Setup
MOVE OK
DVD-Recorder
DVD-RW(VR)
Title List
Enter VideoPlus+ Code number. [0-9]
Playlist
Disc Manager
Programme
Setup
0-9 NUMBER
DVD-Recorder
DVD-RW(VR)
No. Source Day Start End Speed PDC Edit
Source Day
PR 01 01 MON
Available Time 00:42 XP
MOVE OK
DVD-Recorder
DVD-RW(VR)
No. Source Day Start End Speed PDC Edit
01 PR 01 01 MON 12:01
02
MOVE OK
Downloaded From Disc-Player.com Samsung Manuals
Scheduled Record List
Current Time 12:27
15:07 No. 01 14:07 SP CH
►
12:08 14:08 SP CH
►
/ : :
►
No
RETURN EXIT
Programme
►
►
►
RETURN EXIT
VideoPlus+
OK RETURN EXIT
Scheduled Record List
Current Time 12:00
No. 01
Start End Speed PDC
12:01 14:01 SP Off
RETURN EXIT
Scheduled Record List
Current Time 12:00
14:01 SP Off
►
: :
►
RETURN EXIT

Deleting the Scheduled Record List

Follow these directions to delete an entry from the timer record list.
1. With the DVD Recorder in Stop mode, press the TIMER button.
2. Press the OK or ► button.
3. Press the ▲▼ buttons to select the number of the timer recording you
want to delete, then press the OK or ► button.
• The Edit and Delete items are displayed.
4. Press the ▲▼ buttons to select Delete, then press the OK or ► button.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
• The selected entry will be deleted from the list.
■
You can not delete programmes that are currently being recorded.

Using the Video Plus+Feature

Before presetting your DVD Recorder.
• Switch on both the television and your DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Programme, then press the OK or ►
button.
3. Press the ▲▼ buttons to select VideoPlus+, then press the OK or ►
button.
• A message is displayed to allow you to enter the Video Plus+ code.
4. Press the number buttons to enter the code of the programme that you
want to record in your television magazine.
• If you want to correct the Video Plus+ code that you are entering:
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
5. Press the OK button.
• The information concerning the programme is displayed.
• When using the Video Plus+ function for the fi rst time with stored stations,
the programme number fl ashes. This one time, you must enter the PR
number manually by pressing the ▲▼ buttons.
6. If the programme and times are correct, press the OK button.
7. Turn the power off by pressing the STANDBY/ON button to activate the
timer recoding setting.
• Refer to pages 39~40 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
■
The numbers next to each TV programme listing in the magazines
or newspapers are Video Plus+ code numbers, which allow you to
programme your DVD Recorder instantly with the remote control.
Enter the Video Plus+ code for the programme you wish to record.
■
Video Plus+ is a trademark of Gemstar Development Corporation.
The Video Plus+system is manufactured under licence from Gemstar
Development Corporation.
English - 41
DVD-R155 only
DVD-R155 only