Storage Of Heater; Maintenance; Lighting In Windy Areas - Dura Heat TT-360 User's Manual And Operating Instructions

Propane tank top construction heater
Table of Contents

Advertisement

When using this heater indoors where there is wind, it will be necessary to use a match or long stem butane
lighter to ignite the burner. It may be difficult to keep the match lit long enough under windy conditions. Follow
the "Lighting instructions when Using a Match" procedure after doing the following:
1. Position the heater and cylinder such that the Thermocouple is opposite the direction that the wind is
coming from.
2. Position your body behind the heater such that your body blocks the wind while you are
following the instructions for lighting with a match.
Never store a Propane gas tank inside a building or in the vicinity of any gas or oil burning appliance. Always
remove the heater from the propane tank after each use and store indoors. Do not store heater while attached
to propane tank. Do not store propane cylinders in a building, garage or any other enclosed area. The tank
must be disconnected and stored outdoors in a well ventilated area out of reach of children, in accordance
with the standard for the the Storage and Handling of Liquefied Petroleum Gases, ANSI / NFPA 58 and CSA
B149.1, Natural Gas and Propane Installation Code. The plastic tank valve plug supplied with your tank must
be tightly installed when the tank is disconnected from the heater.
1. Turn unit off, allow heater to fully cool and disconnect propane hose before performing any Maintenance
functions.
2. Keep unit clean and keep the inside of the unit debris free.
3. Have unit checked by a qualified technician at least once a year, preferably prior to the heating season.
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
PROPANE TANK TOP HEATER

LIGHTING IN WINDY AREAS

MAINTENANCE INSTRUCTIONS
STORAGE
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents