Kodak EASYSHARE P750 Extended User Manual page 36

Troubleshooting and support
If...
You set automatic
on/off but the frame
doesn't turn on and off
at the specified times.
Screen messages
Screen message
File is bad.
(usually preceded by the file name.
For example: xxx_xxxx.JPG file is
bad)
Write failed. Select another
location.
Error attempting to open file or
directory.
Error occurred while closing a file.
Error invalid filename.
Error reading from file.
Error writing from file.
Error writing a file.
Error writing to a file.
File Copy Failed!
Internal error.
Parameter is invalid.
Unknown error.
30
Try one or more of the following
If your frame loses power, the clock returns to the factory setting and
auto on/off times are disabled. See
power, page 31.
Try one or more of the following
The frame cannot display the picture because the file is
corrupted or it's an unsupported file format
NOTE: Videos are not supported.
The frame was unable to copy the picture.
Insert a different card or device
Turn off the frame, then turn it back on. Press and
hold the power button (for about 2 seconds), then
release. If the problem persists, contact customer
support help, at
www.kodak.com/go/digitalframesupport.
Re-setting your frame after losing
(page
www.kodak.com/go/support
(see page 32).
6).