OHM CRED Mark 2 2-4 User Manual page 20

Information
With the exception of HD and Lunaray Systems all settings are based on a 1:1 ratio and for use with
CFU-A3 amplifiers with gain sensitivity set at 1.1v.
Delays are set for "flush fronts".
Note: Delays are NOT linked so care should be taken to address the whole system especially in 3 and
4 way systems IE: Saturn and HD when any adjustments are made.
"LUNARAY 1" is set up for a "soft" mid/high sound,
"LUNARAY 2" is set up for a "linear" sound
HD set up is based on 2 stacks each side.
Any room adjustments should be made on the input EQ only.
20