If
Picture orientation is
not accurate
Flash does not fire
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message appears
on EVF/LCD
www.kodak.com/go/support
Try one or more of the following
■
Set the Orientation Sensor to ON
■
Open the flash unit
■
Check the flash setting and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer pictures to the computer
■
Delete pictures from the card
■
Change image storage location to internal memory
page
31).
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery
■
Turn camera off, then on again. Make sure the camera is not in
Favorites mode. If prompted, set language and date/time.
■
Press Shutter button all the way
■
Insert a new or charged battery
■
Wait until the AF/AE indicator turns green before attempting to
take another picture.
■
Memory full. Transfer pictures to the computer
pictures
(page
17), change image storage location
or insert another card.
■
Follow the EVF/LCD prompts.
■
Remove memory card from the camera.
■
Turn the camera off, then on again.
■
Remove the battery and wipe the contacts with a clean, dry cloth.
■
Insert a new or charged battery
■
Get customer support help
(see page
(page
9).
(page
(page
17) or insert a new card.
(page
2).
(page
5).
(page
2).
(page
2).
(page
52).
Troubleshooting
32)
(page
9).
44).
(see
(page
58).
(page
44), delete
(see page
31),
49