Levelling The Refrigerator - Samsung Refrigerator User Manual

When installing, servicing, or cleaning
behind the refrigerator, be sure to pull the
CAUTION
unit straight out and push back in straight
after finishing.
Also, make sure your floor supports the full-
load refrigerator.
Otherwise, it may cause floor damage.
Please tie up the extra length of the power
cord at the back of the refrigerator so as
CAUTION
not to be touched on the floor preventing
the power cord from being crushed by the
rollers upon relocation.
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that has
the same height as the rest of the flooring.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the floor finish, cut a large section of the
cardboard carton and place it under the refrigerator
where you are working.
Pulling or pushing the refrigerator may
damage the floor.
Moving the refrigerator after installation may
damage the floor.
DA68-02960A (EN)-02.indd 18

LEVELLING THE REFRIGERATOR

To avoid a hazard due to
instability of the refrigerator,
please place the refrigerator
on a horizontal support and
levelled in accordance with
the following instruction for
installation.
Failing to do so may result in
the refrigerator tipping and a
personal injury.
If the front of the appliance is
slightly higher than the rear,
the door can be opened and
closed more easily.
< Case1 >
English - 18
< Case2 >
14. 1. 8. 3:42