Headband Pressure Adjustment - Telex Echelon 25XT User Instructions

Headband Pressure Adjustment

There are three (3) pressure settings for headband comfort. Increasing the pressure
improves the seal between the earcup and the head for greater noise reduction.
To change the pressure setting, do the following:
Remove the headset.
1.
Fold the earcup inward, as shown in (Figure 3).
2.
Rotate the Comfort Cam adjustment knob to the desired setting.
3.
Repeat for both earcups.
4.
Both sides of the headband should be set to the same pressure setting to keep
the headband properly centered on the head.
Comfort Cam™
ADJUSTMENT KNOB SETTINGS
HIGH MEDIUM
Headband Pressure Adjustment
FIGURE 3.
LOW
5