Table of Contents
Advertisement
Specifications
Receivers
Type: Dynamic
Impedance: accepts 150 Ohm (stereo) 300 Ohm (mono) source
Frequency Response: 350Hz -3.0 kHz ±6dB
Sensitivity: 90 ±5dB SPL for 1mW, 1kHz input
Maximum Power Input: 30mW
Microphone/Amplifier Assembly
Microphone Type: Noise-canceling electret condenser
Output Impedance: 50 Ohm
Frequency Response: 100Hz – 3.5kHz
Sensitivity: -50 ±6dB (ref: 1V/μbar)
Operating Voltage: 8–16Vdc
Cords and Plugs
Cord: 5.5ft (1.7m) "y" cord with stereo/mono selector switch
Receiver Plug: 1/4" stereo phone plug
Microphone Plug: PJ-068 equivalent
2.5mm 3 conductor audio jack for connection to cell phone connection
3.5mm 3 conductior audio jack for connection to auxiliary audio
11
Advertisement
Table of Contents
