Ais Plug Set (13S-A4890-70) - Yamaha 2010 YZF-R6 Manual Instruction

12. AIS Plug Set (13S-A4890-70)

This plug set is used when the AIS (Air Induction System), an exhaust gas purification system,
is removed.
Parts List
No. PART No.
1 5SL-1482L-70
* 2 93608-16M16
3 90336-10020
Installation
1. Remove the hose attached to the cylinder head cover and the air cut-off valve assembly
accompanying the hose.
2. Remove the cap fitted to the hose and remove the reed valve and plate from the inside.
3. Install the plate (5SL-1482L-70) in replacement of the cap. Apply liquid gasket to the plate.
4. Remove the cylinder head cover and the four collars fitted to the cover. Install the PIN
(93608-16M16).
5. After removing the hose connected to the air cleaner case from the air-cut valve assembly,
open the upper case of the air cleaner case and insert the PLUG (90336-10020) into the
hole where the hose was connected.
PART NAME
PLATE, 2
PIN, DOWEL
PLUG, TAPER
– 13 –
Q'TY REMARKS
2
4
1