Table of Contents
Advertisement
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
All the hotplates have this function.
To activate
The hob must be switched on, but no hotplate should be
working.
Select a hotplate.
1.
Press the boost
symbol.
2.
The
indicator lights up
The function should be activated.
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
Select the required hotplate and power level.
1.
Press the
symbol. The
2.
up.
is displayed on the time program function display.
Press the + or - symbol. The basic setting appears:
3.
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Select the hotplate . Press the
cooking time with the + or - symbols, or set to
14
.
indicator on the hotplate lights
symbol and change the
.
Note: If any hotplate is switched on when the Powerboost
function is working,
and
the power level
will then be set
will be deactivated.
To deactivate
Select a hotplate.
1.
Press the symbol boost .
2.
The
indicator will no longer appear and the hotplate will
return to the power level
The function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
The
indicator on the hotplate lights up. Pressing the
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
The timer can be selected in two different ways:
1.
If you have selected the hotplate: press the
twice.
If you have not selected the hotplate: press the
The
indicator next to the
displayed on the time program function display.
Press the + or - symbol. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the
symbol various times until the
the
symbol lights up. Change the time or set to
the + or - symbols.
Once the time has elapsed
A warning signal sounds.
function display. After 10 seconds the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
beeping.
will flash on the hotplate display;
. The Powerboost function
.
appears for 10 seconds.
symbol
symbol lights up.
indicator next to
is displayed on the time program
symbol.
is
with
Hide quick links:
Advertisement
Table of Contents
