Setup; Unpacking; Lamp Installation - Martin Professional MX-10 Extreme User Manual

S
ETUP

Unpacking

The MX-10 Extreme comes with:
• MSD 250/2 lamp (not installed)
• 3-meter, 3-wire IEC power cable
• user manual
Important! Cut and remove the cable tie from the tilt motor bracket before operating.
The packing material is carefully designed to protect the fixture during shipment - always use it or a custom flight case
to transport the fixture.

Lamp installation

A lamp must be installed prior to initial operation.
C O M P A T I B L E L A M P S
A Philips MSD 250/2 lamp is included. The MX-10 Extreme lamp options are shown in the table below. Installing any
other lamp may damage the fixture.
Lamp
Osram HSD 250
Philips MSD 250/2
Philips MSD 200
6
Average life Replace before
2000 hr 2500 hr
2000 hr 2200 hr
2000 hr 2200 hr
Table 1: Lamp comparison
MX-10 Extreme
Color Temp. Output
6000K 68 lm/W
6500K 72 lm/W
5600K 67 lm/W
P/N
97010103
97010100
97010106