Setting Exposure Compensation - Kodak EasyShare LS633 User Manual

Setting Exposure Compensation

Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in contrast-heavy scenes, or for retaking
pictures when you are not satisfied with the brightness.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
1 In any Still mode, press the Menu button.
2
Press
button.
28
Chapter 2
to highlight Exposure Compensation
3
Press
Compensation setting.
m
m
4
Press the OK button to accept the change.
5
Press the Menu button to exit the menu.
6 Use the camera screen to frame your
subject. Press the Shutter button half-way
and hold to set the focus, then press the
rest of the way down to take the picture.
This setting remains until you change the
Mode dial or turn off the camera.
to select the Exposure
If pictures are too light, decrease the
value.
If pictures are too dark, increase the
value.
, then press the OK