Basic Connection - Panasonic TC-42PX14 Operating Instructions Manual

Attaching the pedestal to TV
■ ■
Assembling the pedestal Set-up
Fix securely with assembly
screws . (Total 4 screws)
A
Tighten screws firmly.
A
B
Pole
R
Pole
L
Front
Base
Pole
Base
Warning Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
6
Accessories
Carry out work on a horizontal
Assembly screws
and level surface.
(4 of each)
Tighten screws firmly.
A
M5 x 18
Bottom view
(Silver)
Rear side Poles (2)
Arrow
mark
L
Hole for pedestal
installation
Pole
Base (1)
Fix securely with
assembly screws .
B
(Total 4 screws)
AC cord connection
To attach To remove
Keep pushing both
side snaps and pull
down
Insert it firmly until the
tabs on both sides click
into place.

Basic Connection

Example 1
B TV
M5 x 25
(Black)
or is
L R
printed at
R
the bottom
of the poles.
Cable TV
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment's connections, please refer to the operating manuals for the equipment.
When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
For additional assistance, visit us at: www.panasonic.com
Connecting Antenna (To watch TV)
VHF/UHF Antenna
•
VHF/UHF Antenna
NTSC (National Television System Committee):
Conventional broadcasting
•
ATSC (Advanced Television Systems Committee):
Cable TV
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.
To connect the antenna terminal and Cable Box
VHF/UHF Antenna
or
Back of the TV
(If no Cable Box)
or
Cable Box/Cable
ANT IN ANT OUT •
You need to subscribe to a cable TV service to enjoy viewing their
programming.
•
If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.
•
You can enjoy high-definition programming by subscribing to a high-
definition cable Service.
The connection for high-definition can be done with the use of HDMI or
Cable Box
Component Video cable.
•
To view high-definition programming select the correct video input.
www.panasonic.ca
AC 120 V
60 Hz
AC Cord
(Connect after all the
* See page 6
other connections
(AC cord
have been made.)
connection)
H H
Y Y
P P
B B
VIDEO VIDEO
P P
R R
L L
AUDIO AUDIO
R R
7