Notes; Accessories/Optional Accessory - Panasonic TC-42PX14 Operating Instructions Manual

Safety Precautions
Transport only in upright position
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
Using a dry cloth, clean any dust from the power supply
cord and plug regularly.
Build-up of dust on the power cord plug can increase
humidity, which might damage the insulation and cause a fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the power
supply cord is connected to the wall outlet.
CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer's recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
•
One size does NOT fit all. Follow the manufacturer's recommendations for the safe installation and use
of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this product.
•
Don't allow children to climb on or play with furniture and television sets.
•
Don't place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
• Remember that children can become excited while watching a program, especially on "larger than life"
flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.
• Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
•
Follow all instructions supplied by the display and wall mount manufacturers.
•
If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
•
Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.
•
A minimum of two people are required for installation. Flat panel displays can be heavy.
Panasonic recommends that a qualified installer perform the wall-mount
installation. See page 3.
4
(Continued)
Display panel is made of glass. Do not apply strong force
or impact to the display panel.
This may cause damage resulting in injury.
The TV is heavy. TV should be handled by 2 or more
people. Support as shown to avoid injury by the TV
tipping or falling.

Notes

Do not display a still picture for a long time
This causes the image to remain on the plasma screen
("Image retention"). This is not considered a malfunction and is not covered by the warranty.
12
4 : 3
Typical still images
•
Channel number and other logos
•
Image displayed in 4:3 mode
• • •
SD Card photo Video game Computer image

Accessories/Optional Accessory

Accessories
Check you have all the items shown. (Accessories)
Remote Control Batteries for the
Remote Control
Transmitter
N2QAYB000321 Transmitter (2)
AA Battery
Pedestal
Operating Instructions (Book)
TBLX0088
(TC-42PX14) Operating Instructions (CD-ROM)
TBLX0089
Viera Concierge and basic
(TC-50PX14)
instruction for HDTV
Optional Accessory
Note
In order to maintain the TV's performance and safety, be absolutely sure
to ask your dealer or a licensed contractor to secure the wall-hanging
brackets.
Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.
Wall-hanging bracket
Handle the TV carefully during installation since subjecting it to impact
(angle)
or other forces may cause its panel to crack.
TY-WK4P1RW
Installing the remote's batteries
Open
Hook
Note the correct polarity
(+ or -).
To prevent "Image retention", the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.
■
Set up
Do not place the unit where it's exposed to sunlight or
other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the
remote control's transmission range.
Cleaning cloth AC cord
Product Registration Card
(U.S.A.)
Customer Care Plan Card
(U.S.A.)
Caution
Incorrect installation may cause
Close
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or break batteries.
5