Sedna VT6306 User Manual

Pci via ieee 1394a 3+1 ports card

Advertisement

PCI VIA IEEE 1394a 3+1 Ports Card
PCI VIA VT6306 IEEE 1394a 3+ 1
Ports Card
User Manual
User Manual Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT6306 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sedna VT6306

  • Page 1 PCI VIA IEEE 1394a 3+1 Ports Card PCI VIA VT6306 IEEE 1394a 3+ 1 Ports Card User Manual User Manual Version 1.0...
  • Page 2: Product Features

    PCI VIA IEEE 1394a 3+1 Ports Card Product Features : - 32 bits CRC generator and checker for receive and transmit data - On-chip 2K isochronous and 2K asynchronous receive and transmit FIFOs - 8 isochronous transmit / receive contexts - 3-deep physical post-write queue - 2-deep physical response queue - Dual buffer mode enhancements...
  • Page 3 PCI VIA IEEE 1394a 3+1 Ports Card Driver Installations (Windows XP) 1. Power off the computer. 2. Install the PCI Card in a PCI slot. 3. Power on the computer and let the operating system detects the Card. 4. Normally, no drivers are needed for 1394a card. Follow the operating system screen.
  • Page 4 PCI VIA IEEE 1394a 3+1 Ports Card 5. After installation completed, the system will be reset. 6. After Re-boot, “VIA OCHI Compliant IEEE 1394 Host Controller” will be shown. 7. When a DV device is connected with 1394 port, Device Manager will detect the device.

This manual is also suitable for:

Pci via ieee 1394a 3+1

Table of Contents