Table of Contents
Advertisement
Quick Links
SE-WL-PCI-03-11G
PCI CARD DRIVERS INSTALLATION
Table of Contents
1. Introduction....................................................................2
1.1 System Requirement....................................................2
1.2 Objects Counting..........................................................2
2. Installation.......................................................................2
2.1 Install Wireless PCI Adapter..........................................3
2.2 Install Driver and Application for Wireless Adapter......3
3. The use of Application.....................................................6
3.1 Launch the Utility...........................................................7
3.2 Wireless Network...........................................................7
3.3 Link Status.....................................................................9
3.4 Advanced.......................................................................9
3.5 Statistics......................................................................10
3.6 WMM...........................................................................11
3.7 WPS............................................................................16
3.8 Configuration...............................................................25
4. Zero Configuration................................................31
5. SOFT AP .....................................................................35
5.1 Start SOFT AP.............................................................35
5.2 Configuration Page......................................................35
5.3 Access Control............................................................36
5.4 MAC List......................................................................37
5.5 Switch to working station mode...................................37
6. Product specification...................................................38
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sedna SE-WL-PCI-03-11G
Summary of Contents for Sedna SE-WL-PCI-03-11G
- Page 1 SE-WL-PCI-03-11G PCI CARD DRIVERS INSTALLATION Table of Contents 1. Introduction..............2 1.1 System Requirement............2 1.2 Objects Counting............2 2. Installation...............2 2.1 Install Wireless PCI Adapter..........3 2.2 Install Driver and Application for Wireless Adapter……3 3. The use of Application.............6 3.1 Launch the Utility............7 3.2 Wireless Network............7 3.3 Link Status..............9 3.4 Advanced...............9...
-
Page 2: Introduction
1. Introduction 1.1 System Requirement Please confirm that you have the following system configuration. The computer with more than 300MHz Central Processing Unit (CPU) The system memory should be no less than 32MB The operation system should be Windows Vista/XP/2000/ME/98SE CD-ROM in order to install the driver 1.2 Objects Counting Please confirm that the package box of the production you... -
Page 3: Install Wireless Pci Adapter
Diver and Application. The Wireless Adapter is compatible with the operation system Windows 98/Me/2000/XP/Vista.This guide will explain the process of the installation through installing hardware and software on Windows XP. 2.1 Install Wireless PCI Adapter Turn off your desktop PC and disconnect the power cord, insert the adapter into the PCI slot of your desktop PC carefully and make sure that the edge connector is aligned correctly. - Page 4 2 Insert the Driver CD-ROM into your CD-ROM drive. The setup wizard will run automatically. If it does not, browse the CD-ROM by double-clicking the CD-ROM drive icon, then double-click on the “ Setup.exe” file to start the installation procedure. The welcome screen will appear, please read the Grant of License in detail and accept the terms of the license agreement, click “...
- Page 5 5. If you need the adapter to operate with better performance, please choose “ Optimize for Performance Mode” to enable Tx Burst mode or select “ Optimize for WiFi Mode” to use the adapter in a standard wireless network. Click “ next” to continue.
- Page 6 6. Click “ Install” to continue, and copy the corresponding documents. 7. When the installation is complete, please click “ Finish” .
-
Page 7: The Use Of Application
3. The use of Application it can The application is a tool to manage the wireless adapter, use check and amend the configuration of the wireless adapter, or monitor the running status of your wireless adapter. 3.1 Launch the Utility After launching the utilities, you will see the icon shown in the right. - Page 8 SSID -- Means the adapter is connected or will be connected, the right figure shows that the adapter is connected, SSID is the default network. BSSID -- Means the MAC address of connected AP or the basic service device ID of Hoc AP. Channel- Shows the present signal channel of the adapter.
-
Page 9: Link Status
the persons in the meeting could share the meeting record in the meeting room. Rescan-- Make the adapter rescan the available device. If the link is not good or the signal is too weak, the rescan will make the adapter link to a better device which will take several seconds. -
Page 10: Advanced
3.4 Advanced Click “ Advanced” and the following figure will appear, we suggest you not modify any item but keep the default configurations. 3.5 Statistics Click “ Statistics” and the following figure appears, which displays transmitting and receiving statistics. Click “ Reset Counter” could reconfigure the statistics to zero... - Page 11 3.6 WMM Click “ WMM” ,you can make the corresponding settings which include the priority settings of WMM information transmitting, start Power Save Mode and DLS settings shown as below, 3.6.1 Start WMM: Start Wi-Fi Multi-media 1.Choose“ WMM Enable” shown as below,...
- Page 12 In the “ Network” page, add the AP which supports WMM to configuration information. After setting successfully, you will see the following figure in the function page “ Profile”...
- Page 13 3.6.2 Start WMM Power Save Mode 1.Choose “ WMM -Power Save Enable” shown as below, 2. Choose“ AC_BK” ,the settings is successful shown as below, 3.6.3 Start DLS (Direct Link Setup) 1.Choose“ Enable” shown as below,, Direct Link Setup...
- Page 14 In the “ Network” page, add the AP which supports WMM to configuration information. If set successfully, you will see the following figure in the function page “ Profile”...
- Page 15 3 The mode of Direct Link Setup is as follow: Fill the MAC address in a STA, the STA should meet the following two, A. Can link AP which supports DSL. B. Have to start DLS function. 3.7 WPS Click “ WPS” ,you can make corresponding settings. WPS includes authentication, encryption, network type, channel, Extra info, status, version, security settings of AP, sole identification code, radio frequency and so on shown as below,...
-
Page 16: Configuration
WPS settings--Simplify the program and configuration of the network (Wi-Fi Protected Setup). The STA of Ralink is Enrollee or Registrar, use PIN or PBC mode to offer online settings. WPS wireless network-The system will scan the AP with WPS IE, and then list every AP information with WPS IE including SSID, BSSID, Channel, ID, Authentication, Encryption. - Page 17 Pin Code-Under the Registrar online setting mode, when you use “ PIN online setting mode” , you will be asked to input a set of PIN code. When the STA of Ralink is Enrollee, you can use “ update” button to produce a set or PIN code again. Online Setting Mode- The STA of Ralink plays the part of Enrollee or Registrar.
- Page 18 WPS Probe IE- During the period of WPS online settings, transmit an probe IE with WPS IE. For STA, it is optional. Speed list-Show the speed proportion from beginning to online success. Status list- Show the present status of WPS. Automatically select the AP-Choose an AP and start to be online when use “...
- Page 19 3. Choose an AP you want to add, and click the button “ PIN” , type PIN provided by STA into Registrar. 4. If you use shared Internet online as external Registrar, you have to start “ PIN online” at STA port firstly, then find the device name and MAC address of WPS from Microsoft’...
- Page 20 5. Online setting and get a set of or more sets of Credentials. The successful online is shown as below. 6 The detailed contents of successful online setting are shown as below,...
- Page 21 * If the first Credential is valid and existing, the system will connect AP of the first Credentials. Contrarily, the system will connect AP of the next Credentials automatically. * You can also press the button “ Rotate” for rotating online next AP of the Credentials.
- Page 22 2. Under the Configuration mode, choose “ Enrollee” and press the button “ PBC” to be online. 3. Choose an AP to connect PBC as below,...
- Page 23 4. Confirm that the AP has valid WPS function, see the following picture. 5 Online setting to get one group or more Credentials. The successful online is shown as below, 3.7.3 Use PIN or PBC link mode to connect an AP or a network Use PIN or PBC link mode to connect an AP or a network shown as below,...
- Page 24 2 In the configuration mode, choose Registrar shown as below, 3 If changing SSID, Authentication Type, Encryption Type and Key Material, please press the button “ Detail” ,manually change the contents.
- Page 25 4. If use “ PIN online setting mode” , please type PIN code of Enrollee. 5. Start “ PIN online setting” or “ PBC” online setting. The following setting is same as 3.7.1(Enrollee mode PIN setting) or 3.7.2(Enrollee mode PBC setting). 6 If Enrollee has done online setting before running WPS, the Credentials will be updated as Enrollee setting;...
- Page 26 7 The detailed setting of “ WP ”- “ PIN – xxx ” is as follow: A successful PIN online setting: Start PIN connection - SSID -> Begin associating to WPS AP -> Associated to WPS AP -> Sending EAPOL-Start -> Sending EAP-Rsp (ID) ->...
- Page 27 Delete - To delete the configuration which will not be used. Edit - To modify the configuration of wireless network. Activate- To choose a configuration which applies to the present network from several configuration documents. Append - To increase new configuration. 【System Configuration】...
- Page 28 【Auth.\Encry.】 In this page, the user could make the setting about Encryption and Authentication for the Wireless Adapter. For the data security of the wireless environment, IEEE 802.11 stipulates WEP(be equivalent to Wired encryption) protocol to ensure the transmission security. WEP uses the encryption key to encrypt or decrypt the packet.
- Page 29 Open--- This option makes the network run under the open system mode without any authentication. Open base station and AP could authenticate with each other even there is WEP encryption key. Shared encryption key- This option makes the network run under shared encryption key.
- Page 30 supports Temporal Key Integrity Protocol (TKIP) and Advanced Encryption Standard (AES) FORBID ---Forbid the encryption function. WEP -- The shared key performs the encryption before data wireless transports, you could communicate with the wireless devices which use the same shared key. TKIP --TKIP uses the stricter encryption rules than the WEP, and also use the existing WLAN arithmetic to realize the encryption.
- Page 31 【802.1x configuration】 When choose “ WPA” or “ WPA2” under authentication mode you could configure this option. If you chose “ Open” “ Shared-key” , you could also click “ 802.11 x authentication” configure 802.11x. The authentication includes, PEAP --PEAP (Protected Extensible Authentication Protocol) is an edition of EAP Extensible Authentication Protocol。...
-
Page 32: Zero Configuration
extension of security channel. In the extensible function edition 3(CCX v.3) which is compatible with Cisco, Cisco increases supports for EAP-FAST, the protocol establishes verified channel between user port and sever by using PAC. Mutual validation doesn’t need to use certificate, but use certain method of PAC to achieve it. - Page 33 Configuration as configuration Utility” and then Windows wireless network configuration could be used. If you choose “ Launch Configuration Utilities ” , it will use Ralink configuration procedure shown as below, 1. Double click the wireless network icon in the taskbar to check the wireless network, choose the network and click “...
- Page 34 4.【General】“ General” displays link time, speed and signal strength which is shown in green line, 5 lines shows the signal is good, 1 line shows the signal is bad. 5.【View Wireless Network】shows preferred network. Use the button “ Add” to add the “ SSID” of available network, if there are several available networks, link priority could be configured by the button “...
-
Page 35: Configuration
6.【Authentication】“ Authentication” permits you to add security configuration. You could refer to Windows Help to get more information. 7. 【Advanced】 “ Advanced” permits you configure firewall and share. You could refer to Windows Help to get more information. -
Page 36: Start Soft Ap
5. Soft AP The adapter has two modes: working station and Soft AP. After starting Soft AP, the adapter will be an AP to accept any wireless device access. Notice: the soft AP is available only in Windows XP. 5.1 Start Soft AP After starting configuration software of adapter, you could see figure in the... -
Page 37: Access Control
5.2 Configuration Page As the above picture, you could make some basic configuration, such as wireless network name, mode, channel, authentication and so on. Click the button “ Auth. Vs. Security ” to make different security configuration of wireless communication shown as below. And you could choose all kinds of authentication types and encryption types, such as WEP64 Bits and WEP128 Bits encryption. -
Page 38: Switch To Working Station Mode
5.4 MAC This page shows the information of the wireless devices accessed to this AP. 5.5 Switch to Working Station mode As the right picture, under the Soft AP mode, right click the configuration... - Page 39 software tray icon and appear a menu, please choose “ Switch to Station Mode” , then the adapter is switched to working station mode together with an interface of working station. Specification: Standard& IEEE 802.11g、IEEE 802.11b、CSMA/CA with ACK protocol Interface 32-bit PCI 2.1/2.2/2.3 Frequency range 2.4~2.4835GHz 11g 54/48/36/24/18/12/9/6M auto adaptive...
- Page 40 Operation Temp.: 0℃ - 45℃ Storage Temp.: -20℃ - 70℃ Environmental Operation Humidity 10% - 95% RH, Non-condensing Safety CE, FCC...
Need help?
Do you have a question about the SE-WL-PCI-03-11G and is the answer not in the manual?
Questions and answers