Charging The Battery; Using The Menu - HiTV Belva 40 User Manual

II. Charging the Battery
It's easy to recharge the battery by the following steps:
1. Connect the power adapter to the DC power-in jack.
2. The charging indicator will be turned on as RED light.
3. When the battery is fully charged, the charging indicator will be changed to
GREEN light. (It takes about 4 hours to charge an empty battery into full
state)
4. You can now unplug the power adapter from the device.
III. Using the Menu
This is the home menu screen. You can
highlight the DVB-T TV mode, the DVB-T
Radio, the Recorded TV Playback mode,
the Music Playback mode and the System
Settings. Use [VOL+] and [VOL-] buttons
to highlight the desired item and press
[OK] button to select it.
TV
To enter DVB-T TV mode
Radio
To enter DVB-T Radio mode
Music
To enter audio playback mode
Setting
To configure the system setting
7