Sony ICD-PX440 Help Manual page 289

A read-only memory card is inserted. A read-only memory card cannot be used with the IC recorder.
Memory Card Access Denied
Since a memory card containing an access control function is inserted, you cannot use it.
Memory Full
The remaining memory capacity of the IC recorder is insufficient. Erase some files before recording.
(See "Erasing a file")
File Full
When there are already the maximum number of files in the selected folder or the total number of files stored on the IC
recorder has exceeded the maximum, you cannot record a new file. Erase some files before recording.
(See "Erasing a file")
Track Marks are Full
You can set up to 98 track marks for a file. Cancel unwanted track marks.
(See "Erasing a track mark")
File Damaged
You cannot play back or edit files, because the data of the selected file is damaged.
Built-In Memory Needs to be Formatted / Memory Card Needs to be Formatted
The IC recorder cannot be turned on using the computer because there is no copy of the control file required for
operation. Format the built-in memory or the memory card using the formatting function in the menu of the IC recorder.
Do not use your computer to format the built-in memory or the memory card.
(See "Formatting the memory
Process Error
The IC recorder failed in memory access. Remove and then re-insert the batteries.
Save a backup copy of your data and format the built-in memory or the memory card using the menu.
(See "Formatting the memory
Stop and Reinsert Memory Card
A memory card was inserted during recording or playback. Remove the memory card and insert it while the IC
recorder is in the stop mode.
Set Date&Time
Set the clock; otherwise, you cannot set the alarm.
No File
The selected folder does not have any files. You cannot move a file or set the alarm, etc., because of this.
No Track Marks
There are no track marks when you attempt to erase a track mark or track marks, or divide a file at all the track mark
positions.
No Memory Card
There is no memory card inserted into the memory card slot when you attempt to set the "Select Memory" or "File
Copy" menus.
File Protected
The selected file is protected or is a "Read only" file. You cannot erase it. Cancel the protection on the IC recorder or
cancel "Read only" on your computer to edit the file using the IC recorder.
(Format)")
(Format)")
281