Upgrading Your Software And Firmware; Additional Care And Maintenance - Kodak EasyShare Z650 User Manual

Battery charging options
Visit www.kodak.com/go/z650accessories
Kodak EasyShare camera dock series 3—powers your camera, transfers
pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak EasyShare printer dock series 3—powers your camera, makes
4 x 6-in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak 3-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/z650downloads.

Additional care and maintenance

If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow components to air-dry for at least 24 hours before using the camera again.
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
Kodak Web site at www.kodak.com/go/z650support.
www.kodak.com/go/support
for:
Appendix
www.eiae.org or the
61