Using The Framing Marks To Take Pictures; Taking A Video - Kodak EASYSHARE V1233 User Manual

Taking pictures/videos

Using the framing marks to take pictures

Framing marks indicate the camera focus area. In Auto mode (and in SCN modes
designed for pictures of people), the camera attempts to focus on faces.
Framing marks
NOTE: Multiple framing marks may appear when faces are detected. Framing marks do not appear in
Landscape or Video mode. When you use Focus Zone and set Center Zone, the framing marks are
fixed at Center Wide.

Taking a video

6
1 Press the Shutter button halfway.
When the framing marks turn green, focus is
accomplished.
2 If the camera is not focusing on the desired subject
(or if the framing marks disappear), release the
Shutter button and recompose the scene.
3 Press the Shutter button completely down to
take the picture.
1 Press the Video mode button.
The camera enters Video mode.
2 Press the Shutter button completely down,
then release it. To stop recording, press and release
the Shutter button again.
To review and work with videos, see
www.kodak.com/go/support
page 14.