Technical Specifications; El005 - Stand-Alone Data Logger; El040 - Current Monitor Converter; Ta011 - 300 A Current Clamp - PICO EL040 Quick Start Manual

EL040 Current Monitoring Kit Quick Start Guide
To run the software:
 Press the Start button
 Select Programs
 Select Pico Technology
 Select EnviroMon for Windows
After this you will have the option to take a guided tour for further software
assistance.
For further information on setting up the EnviroMon please consult the Getting
Started section of the EnviroMon Help file (which is installed with the software).
5

Technical specifications

5.1 EL005 – stand-alone data logger
Sampling rate
Max readings
Max. no. of sensors
PC connection
Power
Backup battery
5.2 EL040 – current monitor converter
Number of channels
Sensor type
Max. input voltage
Input impedance
Frequency range
Accuracy
Operating temperature
Input connector
5.3 TA011 – 300 A current clamp
Current range
Accuracy
Output voltage
Operating temperature
Maximum conductor size
Frequency response
Safety note
The current clamp is designed to be used on insulated wires. Using
the clamp on uninsulated wires may damage the equipment and
cause injury to yourself or others.
4
1 to 240 minutes per sample
250,000
30 (40 with EL037 and EL041)
RS-232 serial port
12 V DC (mains adaptor supplied)
Internal rechargeable cells
3
Current clamp or current transformer
1 V RMS AC
> 1 MΩ
20 Hz to 1 kHz
±1% (0 to 200 mV)
±2.5% (200 mV to 1 V)
-20 °C to +70 °C
4 mm banana plug
0.1 A to 300 A AC RMS
<50 A: ±3.0%
≥50 A: ±2.0%
1 mV AC per 1 A AC
0°C to 50°C
29 mm
50 Hz to 60 Hz
Pico Technology
DO090-6