Table of Contents
Advertisement
C
N
A
As sensitive persons may suffer an epileptic shock.
Please be aware that damages caused by manual modifications to be the device are not subject to warranty.
Keep away from children and non-professionals.
10. GENERAL GUIDELINES
This device is a lighting effect for a professional use on stages, in discotheques, theatres, etc., the device was
designed for indoor use only.
This fixture is only allowed to be operated with the max alternating current which stated in the technical
specifications in the last page of this manual.
Lighting effects are not designed for permanent operation.
Consistent operation breaks may ensure that the device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. Please don't project the beam onto combustible substances. The minimum distance between
light-output from the projector and the illuminated surface must be more than 0,5 meter.
If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners turned in
the quick lock holes correctly.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to short-circuit, burns, electric shock, lamp explosion, crash, etc.
11. INSTALLATION INSTRUCTIONS
Only install the lamp with the device unplugged from the mains.
The lamp has to be replaced when it is damaged or deformed.
Before replacing the lamp let the lamp cool down, because during operation, the lamp can reach very high
temperature. During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use
a cloth to handle the lamps during insertion and removal.
Do not install lamps with a higher wattage. They generate higher temperatures than which the device was
designed for.
CAUTION!
Never look directly into the light source,
CAUTION!
CAUTION!
17
Advertisement
Table of Contents
