LG LDE3017ST Service Manual page 25

REMOVING THE BROIL ELEMENT
REMOVING THE BROIL ELEMENT
WARNING
• DISCONNET power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
inside the oven.
3. To remove the broil element:
a) Remove the 4 screws from the front and rear
brackets.
2 Front bracket screws
2 Rear bracket screws
COMPONENT ACCESS
(For the Lower oven)
(For the Lower oven)
b) Pull the element forward so that you can
access the terminals and disconnect the wires.
3-10
Terminals
2