Ubee DDW2600 Subscriber User Manual page 54

4.3.1 Wireless - Basic
50
Channel
Interface
Apply
Restore Wireless
Defaults
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
Select a specific channel 1-11 to deploy the wireless network.
This allows you to set the operating frequency/channel
depending on your particular region.
Select Enabled/Disabled to turn on or off the wireless radio
interface. Off makes the wireless access point unavailable for
use.
Click to save.
Click to restore the factory default settings for wireless
configurations.
Ubee Interactive