Ubee DDW2600 Subscriber User Manual page 33

Ubee Interactive
Label
DDW2600 Wireless & DDC2700 Commercial Cable Modem/Router Subscriber User Guide • May, 2010
WAN Connection Type
Host Name
Domain Name
MTU Size
Apply
Description
Select the WAN connection type. For each type, different
data entry is required, as explained below:
1. DHCP: The WAN interface is set to be a DHCP client,
and the IP address is assigned by the service provider's
DHCP server. For more detailed configuration of the
DHCP server on the device, refer to
2. Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
3. PPTP (DHCP): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server's hostname or IP address.
4. PPTP (Static): For Point to Point Tunneling Protocol
Static (PPTP), you must enter the static IP address, IP
mask, default gateway, username, password, and the
PPTP server's hostname or IP address.
Enter the host name for the router. This may be required by
some service providers.
Enter the domain for the router. This may be required by
some service providers.
Enter the Maximum Transmission Unit size, which defines
the largest size of the packet or frame that the device can
transfer (256-1500). If this is not given by the Service
Provider, leave it as is using 0 for the default.
Click to save all changes made in the screen.
4.2.2 Gateway - Setup
page 30.
29