Sears 721.24195S Field Manual page 8

4.7 Belt Changing and Brush Cleaning
MODEL 721.24195S
• Disconnect cleaner from electrical outlet. Check and
remove hair, string and lint build-up frequently in the Air-
Tubine Brush Nozzle brush and brush support areas. If
build-up becomes emcessive, disconnect Air-Tubine
Brush Nozzle from Telescopic wand.
TO REMOVE BELT
1) Turn Air-Tubine Brush Nozzle upside down.
2) Unscrew the four Air-Tubine Brush Nozzle cover screws.
3) Turn Air-Tubine Brush Nozzle rear side up and tilt cover
forward from back until front snaps free.
4) Carefully insert and lift screwdriver at each brush support
to free brush from base.
5) Remove worn belt.
Wheel
6) Slide brush supports off to check and clean brush support
areas. See PARTS LIST for picture of complete brush
assembly.
7
MODEL 721.24195S
Brush Support
Base