Subscribe to Our Youtube Channel
Related Manuals for Vissani HVDR430WE
Summary of Contents for Vissani HVDR430WE
- Page 1 4.3 CU.FT. REFRIGERATOR INSTRUCTION MANUAL Model No.: HVDR430WE HVDR430BE HVDR430SE To ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance.
- Page 2 Product Registration Copy Thank you for purchasing a Vissani product. The first step in protecting your new product is to complete the product registration form on our website at www.mcappliance.com/register .The benefits of registering your product include the following. 1. Registering your product will allow us to contact you regarding a safety notification or product update.
-
Page 3: Table Of Contents
TABLE OF CONTENTS NAMES OF THE PARTS SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS INSTALLATION INSTRUCTION BEFORE USING YOUR REFRIGERATOR ... 5 INSTALLING YOUR REFRIGERATOR ELECTRICAL CONNECTION OPERATING YOUR REFRIGERATOR TEMPERATURE CONTROL .. 7 ICE TRAY THE FREEZER COMPARTMENT WHEN TO DEFROST .. 7 HOW TO DEFROST HOW TO CHANGE THE INTERIOR LIGHT ... -
Page 4: Names Of The Parts
NAMES OF THE PARTS MODEL NO. HVDR430WE/HVDR430BE/HVDR430SE (1) Cabinet Tabletop (2) Door, Freezer Section (3) Temperature Control Box (4) Interior Light Switch (5) Shelf, Refrigerator Section (6) Door, Refrigerator Section (7) Crisper (8) Leveling Leg (9) steel shelf (10) Ice Tray... -
Page 5: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury follow these basic precautions when using your refrigerator. 1) WARNING----Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. 2) WARNING----Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. -
Page 6: Installation Instruction
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, WARNING or injury when using your refrigerator, follow these basic precautions: Read all instructions before using the refrigerator. • DANGER or WARNING: Risk of child entrapment. • To avoid the possibility of child entrapment, please take the following precautions •... -
Page 7: Electrical Connection
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center. This unit is not designed to be installed in an RV or used with an inverter. -
Page 8: Operating Your Refrigerator
OPERATING YOUR REFRIGERATOR Temperature Control Your refrigerator has one control for regulating the • temperature. The temperature control is located on the top center of the refrigerator compartment. The first time you turn the unit on, adjust the temperature • control knob to “7”... -
Page 9: When To Defrost
When To Defrost This unit is not designed to defrost automatically. In order to prevent damage to the interior liner of the unit from excessive frost build-up, please manually defrost the unit every 3 month or when ice / frost is approximately 1/4 “ thick inside the freezer compartment. How To Defrost Defrost the freezer compartment when the ice / frost are approximately ¼”... -
Page 10: Changing The Reversible Door
CHANGING THE REVERSIBLE DOOR CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process. Your refrigerator is built with a reversible door. You have the choice of either opening it from the left or the right side. -
Page 11: Care And Maintenance
side; take down the bottom door baffle block (4), and install it on the opposite side. Reassemble the unit with the door hinges on the opposite side (see the right diagram above). The sequence for reassembling is just in reverse order of disassembling. With the mid hinge not being fastened too tight, align two doors properly on the cabinet and then fasten the mid hinge. -
Page 12: Troubleshooting Guide
TROUBLESHOOTING GUIDE You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM POSSIBLE CAUSE Refrigerator does not operate. Not plugged in. - Page 13 Floor is uneven or weak. Refrigerator rocks on the floor when it is moved slightly. Be sure floor can adequately support refrigerator. Level the refrigerator by putting wood or metal shims under part of the refrigerator. The refrigerator is touching the wall. Re-level the refrigerator and move it from the wall.
-
Page 14: Refrigerator Warranty
Under no circumstances is the consumer permitted to return this unit to the factory without prior written consent from MC Appliance Corporation. Model Parts Labor Compressor (Part Only) Type of Service HVDR430WE One-Year One-Year Five Years In-Home HVDR430BE One-Year One-Year Five Years...
Need help?
Do you have a question about the HVDR430WE and is the answer not in the manual?
Questions and answers
My freezer section doesn’t get very cold. The fridge section does but the freezer can’t seem to hold it’s temperature. Any suggestion?
Possible causes of the Vissani HVDR430WE freezer section not getting very cold include:
- The temperature control is set too warm. Adjust it to a cooler setting and allow several hours for the temperature to stabilize.
- The door is kept open too long or opened too frequently, allowing warm air to enter.
- The door is not closed completely or the gasket does not seal properly.
- A large amount of warm or hot food was recently added, requiring time for the temperature to stabilize.
- The refrigerator was recently disconnected and needs up to 4 hours to cool down completely.
- Airflow inside the unit may be blocked; leave space around items to allow proper airflow.
This answer is automatically generated
Why is the bottom that cold when I have set on max cold
The bottom of the Vissani HVDR430WE refrigerator is very cold when set to maximum cold because the temperature control is set too cold. The manual advises turning the control to a warmer setting and allowing several hours for the temperature to stabilize.
This answer is automatically generated