Setting Up The Photo Traveler; How To Insert The Photo Traveler; How To Pivot The Lens Of The Photo Traveler - Veo PHOTO TRAVELER User Manual

Setting Up the Photo Traveler

How to insert the camera
Insert the camera into the Palm handheld's
Expansion Card Slot as shown on the left.
NOTE: SDIO driver on the Palm handheld must be
v2.0 or higher. The SDIO driver is located on the
CD. If your Palm pops up this error message "The
battery is too low for this operation" when plugging
in the camera, you need to update the SDIO driver
by installing it into your Palm. To install the SDIO
driver, do a Hot Sync operation after installing the
Photo Traveler software.
How to pivot the lens of the camera
In order to point the camera towards an object
away from you, gently turn the head away from
o
the stop. Do not try to force it beyond the 180 .
To face the lens towards you, just turn the head
in the opposite direction.
NOTE: Do not turn the head of the camera
o
beyond it's 180 range of motion. A stop is
provided to prevent overtravel. Forcing rotation
beyond the stop will damage the camera.
Veo Photo Traveler for Palm handhelds - 8 -